- 1. [TenTec] 4 pin mic pinout (score: 1)
- Author: "M. K. Hess" <volim63@gte.net>
- Date: Mon, 18 Dec 2006 07:20:38 -0500
- Hi folks, Can someone mention what pins 1-4 are pinned out for on the std. 4 pin TenTec mic.? I'm trying to wire a 706 for use with my Orion II. Regards, Mike ________________________________________
- /archives//html/TenTec/2006-12/msg00400.html (6,706 bytes)
- 2. Re: [TenTec] 4 pin mic pinout (score: 1)
- Author: W5vhp@aol.com
- Date: Mon, 18 Dec 2006 10:55:17 EST
- Can someone mention what pins 1-4 are pinned out for on the std. 4 pin TenTec mic.? Mike, Pin 1 is audio and 4 is +4v.d.c. for electret mikes. 73, Larry W5VHP ________________________________________
- /archives//html/TenTec/2006-12/msg00402.html (6,584 bytes)
- 3. Re: [TenTec] 4 pin mic pinout (score: 1)
- Author: "Larry Menzel" <retire@means.net>
- Date: Mon, 18 Dec 2006 08:06:56 -0600
- Pin 1 = Mic Pin 2 = Ground Pin 3 = PTT Pin 4 = +9VDC You don't have to ground the connector shell with the OII as with Orion. Larry, N0XB _______________________________________________ TenTec mailin
- /archives//html/TenTec/2006-12/msg00446.html (8,298 bytes)
- 4. Re: [TenTec] 4 pin mic pinout (score: 1)
- Author: John Cox <jecox@tri-lakes.net>
- Date: Mon, 18 Dec 2006 08:34:20 -0600
- Mike Looking in my Omni VI manual it shows the pin out looking at the front of the transceiver as lower right pin1 Mic upper right pin 2 Grd upper left pin 3 Ptt lower left pin 4 +4 Volts DC 73, John
- /archives//html/TenTec/2006-12/msg00447.html (8,580 bytes)
- 5. Re: [TenTec] 4 pin mic pinout (score: 1)
- Author: "Lee Armitage" <LEE@GJ.NET>
- Date: Mon, 18 Dec 2006 10:07:23 -0700
- Mike, Page 9 of the manual shows a diagram of the 4 pin mic pin out. I can fax or scan and email it to you if you needed it. Lee N0LYW 870-234-8989 _______________________________________________ Ten
- /archives//html/TenTec/2006-12/msg00448.html (8,372 bytes)
This search system is powered by
Namazu