- 1. [TenTec] 450 ohm Feed Line - N5BEA (score: 1)
- Author: N0KHQ@aol.com
- Date: Wed, 14 Apr 2004 16:49:18 EDT
- Make sure your feed line is cut for 1/4 wave at your lowest band/frequency of operation. I don't recommend using the balun in conventional tuners.......they are voltage type. You always want to curre
- /archives//html/TenTec/2004-04/msg00171.html (7,140 bytes)
- 2. Re: [TenTec] 450 ohm Feed Line - N5BEA (score: 1)
- Author: Jason Buchanan <jsb@digistar.com>
- Date: Wed, 14 Apr 2004 18:55:07 -0400
- N0KHQ@aol.com wrote: Make sure your feed line is cut for 1/4 wave at your lowest band/frequency of operation. I'm getting the ladder line bug and am wondering how to feed it - the shack is between th
- /archives//html/TenTec/2004-04/msg00173.html (8,414 bytes)
- 3. Re: [TenTec] 450 ohm Feed Line - N5BEA (score: 1)
- Author: ac5e@comcast.net
- Date: Wed, 14 Apr 2004 23:30:54 +0000
- Well, about 60 years ago I was told to keep open wire at least 4X it's own width from anything metallic. With the quibble that I have used very short loops of WELL insulated wire to secure the line t
- /archives//html/TenTec/2004-04/msg00174.html (8,666 bytes)
- 4. Re: [TenTec] 450 ohm Feed Line - N5BEA (score: 1)
- Author: Jason Buchanan <jsb@digistar.com>
- Date: Wed, 14 Apr 2004 21:06:20 -0400
- ac5e@comcast.net wrote: I am thinking about getting one of these gizmos to make life simple: http://radio-ware.com/llock.htm But regardless of what I use to tie the antenna wire to the ladder line, a
- /archives//html/TenTec/2004-04/msg00176.html (9,432 bytes)
- 5. Re: [TenTec] 450 ohm Feed Line - N5BEA (score: 1)
- Author: "jerry judy" <ke8npjmj@ameritech.net>
- Date: Wed, 14 Apr 2004 21:28:20 -0400
- A 1 to 1 balun...... band/frequency of Radio before _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
- /archives//html/TenTec/2004-04/msg00177.html (9,749 bytes)
- 6. Re: [TenTec] 450 ohm Feed Line - N5BEA (score: 1)
- Author: Robert & Linda McGraw K4TAX <RMcGraw@Blomand.Net>
- Date: Wed, 14 Apr 2004 21:02:30 -0500
- I have used one of the "ladder lock" devices for several years and quite successfully I might add. I do support the center of the 256 ft center fed wire with a wooden arm from the top of the 60 ft. t
- /archives//html/TenTec/2004-04/msg00179.html (12,708 bytes)
- 7. Re: [TenTec] 450 ohm Feed Line - N5BEA (score: 1)
- Author: "Edward Crawford" <w4wvw@msn.com>
- Date: Wed, 14 Apr 2004 22:10:12 -0400
- I would be more concerned about what the lightning is going to spew all over the inside of the house if you have no means of disconnecting the feedline away from the house if needed. I think this wou
- /archives//html/TenTec/2004-04/msg00180.html (10,864 bytes)
This search system is powered by
Namazu