Yeah, but I haven't done it yet!! _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Make sure this is not RF. Maybe this is the same power supply you have used with other 100 watt equipment in the past. Does it do it on all bands? Just wanted to make sure this gets brought into the
My astron ss-30 switcher ps only a year old then give my Jupiter a BIG FITTTT!!! last year. Relagated to 2 meter dc power now. It caused rx and tx both to be off and other things. Always be sure. I u
I think that depends on what you call a "big difference." The outstanding performance of the Orion, with close in interfering signals, is largely made possible by the narrow roofing filters ( 1KHz, 6
Hi Don, One thing I am setting up for, in particular, is logic board work for the Omni 6 and the Paragon series. I have built 4 test beds with special adapters that I fabricated to raise components a
Glen, Very interesting for sure... I too have TT and several vintage rigs which I have restored/improved. The Orion II is my main station and I find it superb in every way except...wanting the pan ad
Hi Lee, We have very similar interest indeed. I didn't get into the vintage side of my equipment in my last post. I have that equipment just for fun. I have an Hammarlund HQ 180 paired with a Johnson
Author: mark kenward via TenTec <tentec@contesting.com>
Date: Thu, 20 Sep 2018 16:07:29 +0000 (UTC)
The Paragon is a lot different from PII. I would go for my money back unless it was a give away. Old Paragons were known for bad solder joints all over. PII is more line Omni 6. With general coverage
Author: ROLAND HOWELL via TenTec <tentec@contesting.com>
Date: Thu, 20 Sep 2018 17:18:11 +0000 (UTC)
Hi MarkUnfortunately that is not an option open to me as it was purchased as spares or repair, however I have now got it working, not 100% more like 80%, now have audio and a message saying that PLL
Good luck, Snowy....I soldered on one for a while for a dear elderly friend, with no luck. A scientific approach would have probably proved more useful, but he told me to keep it for parts. 73- Greg
Snowy: Check here on the Ten Tec wiki for my Paragon PLL troubleshooting write up: http://tentecwiki.eqth.net/doku.php?id=585pll 73, Bob WB2VUF On 9/20/2018 1:18 PM, ROLAND HOWELL via TenTec wrote: