Good Afternoon Members of the Group! I am in need of the wisdom of this Group! When needed, I am currently using (and from time to time, repairing) my venerable but aging SB-220 and SB-200 amps. Howe
Richard; You have missed a recent thread regarding the scarcity of the Russian made Svetlana 4CX-1600B which is in the QRO HF3-KDX(?) and the Titan II. And, the Svetlana offices in the USA closed the
Re: The Henry 3KD Premier desk top amp. A link to the spec page: http://www.radiodan.com/Henry/Amp_specs/premier_info.htm and a link to photos of this 8877 tube amp: http://www.radiodan.com/Henry/Amp
Henry amps are not known for quite blowers.. I've owned the 2KD and now have a 3K Classic, and both had noisy blowers.. I've and heard the Premier and it's loud too.. Just about any external anode me
I've just gone through this imperfect exercise considering the amps mentioned. I also am an OMNI-6+ user which will become my third rig once the Orion is out because my second rig before that will be
If you don't need FULL legal limit, I heartily recommend the Ten-Tec Centurion. If you need the limit, I would suggest one of the amplifiers using a pair of 4CX-800's (Alpha 99, Acom 200A, etc). Noth
John, I had an AL-1200 and loved it (sold it to my brother) and now run an AL-1500. FYI, the AL-1200 is not instant on; the 3CX1200A7 is ceramic and has about same warm-up time as the 8877...but it i
WHOA ... The 3CX1200A7 does NOT require a warm-up time like the 8877 does ... The 1200A7 is much more rugged than the 8877 with a grid that will take 50 watts, as compared to the 7 (?) watt rating o
Not only that, the transmitted signal is much cleaner with triodes despite all the tube marketing hoopla about how good "modern tetrodes" are. 3CX1200's have about the longest service life of any tu