All, I will also post this to the Jupiter group, but seems I have no power output on 10 meters. I can see amps being pulled on the power supply when the key is brought up or mike button pressed, but
Karl you should test the output into a dummy load on all bands. If the symptoms are similar on 12 metres and 10 metres then I'd suspect a relay failure. I have written up the repair process on my w
Pick up the phone tomarrow and call Ten Tec service. They will talk you though the check out and if it looks like it will take awhile, they will call you back on their dime. 73 and good luck Bill KC4
Rick and Bill, Thanks for the quick response. Shortly after I posted the question, I also tried 12 meters and found it too had no transmit, but okay receive. I'll take a look at your web page Rick an
I just finished repairing a Jupiter for that same problem. Both the 160M and 10/24 M bands had no transmit output. The problem was the HASCO relays on the LPF module on those two bands. The coils wer
I have been having a similar issue with my Jupiter, and in fact it is home after recent TT service for the problem, but the problem still exists and as far as I have checked, exists on all bands I fi