I tried to update to ver 1.363 tonight. I now have no display . Here's what happened. Downloaded the update, and installed no problem. After I did the reset, all appeared OK, had display, heard audio
Sounds like a problem I had prior to Ten-Tec replacing my CPU board. Jeffrey Griffin <jeffrey.griffin@comcast.net> wrote:I tried to update to ver 1.363 tonight. I now have no display . Here's what ha
sorry to hear about your sad experience Jeff ...i know of one other Orion owner who has had a similar problem ...his radio would just quit working after about 30 min ...finally after a couple days of
Jeff, I did the same thing 2 days before the hamfest. The pointers are different and when you restore the user settings, it makes a BIG mess. Now Gary has the ram erase function in 1.363. I think I h
Jeff, The exact same thing happened to me, but I found a way to recover. Before you send the radio back, try this: 1. Turn off the radio. 2. Hold down the VFO-B LCK button (new command to clear RAM).
John thanks for the info, before I went to bed last night I read your email, and the ram erase worked. All is well now. I would of called TenTec before I send the Orion in ,but your info made me slee
Jeff, My Orion N4PY program can save and restore all the Orion memories. 73, Carl Moreschi N4PY Franklinton, NC -- Original Message -- From: "Jeffrey Griffin" <jeffrey.griffin@comcast.net> To: <tente
Jeff, After having the problem, I have not used the user1, etc. to restore previous settings with software upgrades. I also have the extra filters and the auto-tuner. I need to turn them back on and
I also see the 'don't use' the user1 and user2 functions as a problem that needs to be addressed. John, thanks again for the info... 73 Jeff kb2m Jeff, After having the problem, I have not used the u