Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TenTec\]\s+confused\s+re\s+Corsair\s+II\s+VFO\s+jumper\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TenTec\]\s+confused\s+re\s+Corsair\s+II\s+VFO\s+jumper\s*$/: 6 ]

Total 6 documents matching your query.

1. [TenTec] confused re Corsair II VFO jumper (score: 1): Author: tlogan7@cox.net (tlogan7@cox.net); Date: Mon Feb 10 20:58:29 2003; Hi folks - This is probably going to be extremely embarassing but here goes. I have not turned on my Corsair II since selling the external VFO (shouldn't have). Anyway - I put a RCA cable across the; /archives//html/TenTec/2003-02/msg00439.html (7,427 bytes)
2. [TenTec] confused re Corsair II VFO jumper (score: 1): Author: n4py@earthlink.net (Carl Moreschi); Date: Mon Feb 10 21:13:59 2003; It sounds like your RCA cable acros the VFO in/out jumper is not pushed all the way in. You may have to actually turn in around some as you push in to help clean off any oxidation that may have occur; /archives//html/TenTec/2003-02/msg00440.html (8,483 bytes)
3. [TenTec] confused re Corsair II VFO jumper (score: 1): Author: jimr.reid@verizon.net (Jim Reid); Date: Mon Feb 10 21:18:19 2003; Hi Tim, so far, so good. Now you must put in one more jumper. At the socket into which the external VFO plug was to go, you need to jumper pins 2 and 6. Pin 2 has +12 volts on it, and pin 6 "enables; /archives//html/TenTec/2003-02/msg00443.html (7,600 bytes)
4. [TenTec] confused re Corsair II VFO jumper (score: 1): Author: geraldj@isunet.net (Dr. Gerald N. Johnson, electrical engineer); Date: Mon Feb 10 21:18:35 2003; You need another jumper, pins 2 to 6 on the auxiliary connector to get power to the onboard PTO. 73, Jerry, K0CQ -- Entire content copyright Dr. Gerald N. Johnson, electrical engineer. Reproduction b; /archives//html/TenTec/2003-02/msg00444.html (7,202 bytes)
5. [TenTec] confused re Corsair II VFO jumper (score: 1): Author: vern@mantlelamp.com (Vernon J. Kunes, Jr.); Date: Mon Feb 10 22:12:43 2003; There is a 9 pin Accesory socket in the back. There is a jumper plug with 2 pins shorted (I don't remember which 2). This has to be in place in order to make the Corsair II work. You can get one from; /archives//html/TenTec/2003-02/msg00447.html (8,334 bytes)
6. [TenTec] confused re Corsair II VFO jumper (score: 1): Author: tlogan7@cox.net (tlogan7@cox.net); Date: Mon Feb 10 22:22:38 2003; Jim Reid was right on top of this in a second followed by several others - thanks folks! As Jim says you have to jumper the power connection as well. There is even a picture of the jumper in the manu; /archives//html/TenTec/2003-02/msg00448.html (8,659 bytes)

Current List: 1 - 6
Page: [1]