- 1. [TenTec] paragon pll problem (score: 1)
- Author: "john ferro" <foxbat426@hotmail.com>
- Date: Mon, 03 Sep 2007 23:29:30 -0400
- i'm about to take a chance on a paragon - it's in good shape, but the owner tells me it goes out of lock above 20 mhz. has anyone seen this specific problem? - its interesting to me that the problem
- /archives//html/TenTec/2007-09/msg00086.html (7,021 bytes)
- 2. Re: [TenTec] paragon pll problem (score: 1)
- Author: Rick Williams <ve7asr@yahoo.com>
- Date: Mon, 3 Sep 2007 21:28:02 -0700 (PDT)
- John, you may get some hints from this message in the archives: http://lists.contesting.com/_tentec/1999-01/msg00608.html 73, Rick VE7TK Subject: [TenTec] paragon pll problem From: "john ferro Date:
- /archives//html/TenTec/2007-09/msg00089.html (7,781 bytes)
- 3. Re: [TenTec] paragon pll problem (score: 1)
- Author: Rick Williams <ve7asr@yahoo.com>
- Date: Mon, 3 Sep 2007 21:37:41 -0700 (PDT)
- John here's a well documented analysis of the Paragon and some of the more common problems. http://www.unicorn-meadow.co.uk/radio/Paragon.html 73, Rick VE7TK -- Be a better Heartthrob. Get better rel
- /archives//html/TenTec/2007-09/msg00090.html (6,961 bytes)
- 4. Re: [TenTec] paragon pll problem (score: 1)
- Author: <waltk8cv4612amos@att.net>
- Date: Tue, 4 Sep 2007 06:07:29 -0400
- Talk to TenTec, they will tell you what you / or they will have to do. They told me to remove the PLL board and carefully re-solder all connections you can get at. If you are not comfortable with tha
- /archives//html/TenTec/2007-09/msg00092.html (8,532 bytes)
- 5. Re: [TenTec] paragon pll problem (score: 1)
- Author: Bwana Bob <wb2vuf@gti.net>
- Date: Wed, 05 Sep 2007 20:09:41 -0400
- Its probably just a VCO alignment problem. There are 4 VCO's to cover the whole frequency range. The four cover 0.1 to 7.0, 7.0 to 14.0, 14.0 to 22.0 and 22.0 to 30 MHz. The test point is at the junc
- /archives//html/TenTec/2007-09/msg00128.html (8,468 bytes)
This search system is powered by
Namazu