- 1. [TenTec] ten tec radios and amps (score: 1)
- Author: "john ferro" <foxbat426@hotmail.com>
- Date: Mon, 03 Sep 2007 13:46:28 -0400
- just wondering if ten tec radios can be used with any type linear amplifier solid state or tube? unlike the japanese radios, ten tec seems to do things a little different - so i was just wondering ab
- /archives//html/TenTec/2007-09/msg00071.html (6,975 bytes)
- 2. [TenTec] ten tec radios and amps (score: 1)
- Author: k8vf_mark@centurytel.net
- Date: Mon, 3 Sep 2007 14:05:13 -0400
- Yes. You just have to make sure the relay in rig will handle the voltage and current required by the amp. If not, you need to put a relay between the rig and amp. Mark _______________________________
- /archives//html/TenTec/2007-09/msg00072.html (6,701 bytes)
- 3. Re: [TenTec] ten tec radios and amps (score: 1)
- Author: RaySoifer@cs.com
- Date: Mon, 3 Sep 2007 14:10:43 EDT
- Well, it depends on the specific radio and amp. As I mentioned yesterday, the Argo V has no provision for amp control, so unless you're interested in making mods (count me out of that), you'll need a
- /archives//html/TenTec/2007-09/msg00073.html (8,503 bytes)
- 4. Re: [TenTec] ten tec radios and amps (score: 1)
- Author: K5XS@aol.com
- Date: Mon, 3 Sep 2007 14:16:17 EDT
- After looking for voltage spikes on an oscilloscope, I hooked keying for an Ameritron tube amp directly to the relay output on both my Omni VI+ and Orion II. Both have keyed it without a glitch, and
- /archives//html/TenTec/2007-09/msg00074.html (7,615 bytes)
- 5. Re: [TenTec] ten tec radios and amps (score: 1)
- Author: wilbert a musselman <wamuss@juno.com>
- Date: Mon, 3 Sep 2007 14:19:47 -0400
- I'm using the Omni VII and the Tokoyo Hi Power solid state linear AmplifierHL 1.5KFX I did not use any special cable between them. No relays or anything else. Its been working fine for about 6 months
- /archives//html/TenTec/2007-09/msg00075.html (7,521 bytes)
- 6. Re: [TenTec] ten tec radios and amps (score: 1)
- Author: "George Bennett" <g.m.bennett@charter.net>
- Date: Mon, 3 Sep 2007 14:39:09 -0400
- Hi John With both the Orion and Orion II I have used an Alpha 87A, an Acom 1000 and a Drake L7. All work well. If you have an old amp you could always put an amp keyer between the transceiver and the
- /archives//html/TenTec/2007-09/msg00076.html (8,849 bytes)
- 7. Re: [TenTec] ten tec radios and amps (score: 1)
- Author: Ken Brown <ken.d.brown@hawaiiantel.net>
- Date: Mon, 03 Sep 2007 11:51:05 -1000
- Many brands other than Ten-Tec have an ALC output on the amplifier, which is intended to connect to an ALC input on the exciter (transceiver). This ALC is an attempt to prevent overdrive of the PA.
- /archives//html/TenTec/2007-09/msg00081.html (7,661 bytes)
This search system is powered by
Namazu