I All, I am moving in to a new qth in end of November and start to prepare my antenna farm. My new land is around 3700 square meter so I should be able to install some RX antenna for TB. My new qth i
Hello All, I have moved to new qth and start to plan my 160/80 meter vertical antenna. I was reading in ON4UN LOW Band DXing book about coax and loss. John claims he is using 5/8 hardline coax for hi
Hi All, Thanks for all info regarding my 1000 feet feeder. Well some people mentioned 2 dB loss is not so much. Personally i am agree on what ON4UN says in his book. 0.5 here and another 0.5 ++++ and
Hi Milt I just need to hunt and see if i can find any of the stuff you guys are using in the US. Well i can allways get hold of whatever cable her but it will cost XXXX :-) Thansk again for help and
Hi All, I will soon prepare my 160 meter antenna @ the new qth. Will WD-1/TT military field telephone wire be useful asground radials ?. It have 2-3 coper conductor and 4-5 steel wire. Will prepare 6
Hi All, Thanks to all that have contributed to my question regarding radial wire. I will answer on your private email. 73 Rune LA7THA _________________ Topband Reflector Archives - http://www.contest
Hi All Luis HC1PF is rather active on TB these days, the last two mornings his RST was 559 for two three ours then normally peaking 579 / 589 at one point. Still not in the log her, however I heard h
Hi All, Thanks for all reply regarding HC1PF on top band. I will respond to each direct emails 73 Rune LA7THA _________________ Topband Reflector Archives - http://www.contesting.com/_topband
HC1PF was literally 5NN around 10 min before my local SR this morning. Most of the time he is 559 to 579. Seems there is many EU stations on but many suffer the same as me :-) still not in log. I gue
Hi All, I have sent some direct mails, however info can be downloaded via filemail.com. This was done since the document was more than 200MB. If all work as it should you should be able to download t
Hi all, i have just received my christmas gift from the "princses" a NCC-1 from Dx Engeneering. My plan is to use this with my SAL30 RX array on antenna port A and a single "noise antenna" on port B.
Hi all and Merry Christmas. Before Christmas I received my NCC-1 from Dx Engineering, noise canceler and phase box. I have made two antennas, none resonant antenna approx. 7.3 meter long. I measure t