- 1. Re: Topband: 3C0L (FCP) (score: 1)
- Author: Mike VE3CKO <ve3cko@interpc.ca>
- Date: Sun, 22 Oct 2017 09:41:59 -0400
- I've got 3C0L on 17m, 15m and 12m but the challenge is as always top band. I have an inverted-L with just a couple radials at this time. Noise floor at my QTH in the city is just so high with the inv
- /archives//html/Topband/2017-10/msg00096.html (9,742 bytes)
- 2. Re: Topband: 3C0L (FCP) (score: 1)
- Author: Mike VE3CKO <ve3cko@interpc.ca>
- Date: Sun, 22 Oct 2017 13:33:14 -0400
- I do have K9AY loop system, and it did get some direction from it, had it on the only place it can go in a side yard but was too close to lots of metal objects and power lines. Basically useless so I
- /archives//html/Topband/2017-10/msg00098.html (16,885 bytes)
- 3. Re: Topband: 3C0L (FCP) (score: 1)
- Author: Mike VE3CKO <ve3cko@interpc.ca>
- Date: Sun, 22 Oct 2017 14:02:47 -0400
- ok, the details. The vertical originally was an 80m vertical comprising of a 20' 2" OD mast with a 40' spiderbeam mounted on it. Three 14 gauge wires were attached to the mast fastened along the spid
- /archives//html/Topband/2017-10/msg00099.html (13,933 bytes)
- 4. Topband: YCCC 9 circle/5 square (score: 1)
- Author: Mike VE3CKO <ve3cko@interpc.ca>
- Date: Tue, 19 Feb 2019 12:40:11 -0500
- I see the YCCC 9 circle/5 square kits are no longer available from DX Engineering. Is there somewhere to buy the kits or at least some key parts like the PCBs? -- 73, Mike Kovacich - VE3CKO _________
- /archives//html/Topband/2019-02/msg00191.html (6,955 bytes)
- 5. Re: Topband: YCCC 9 circle/5 square (score: 1)
- Author: Mike VE3CKO <ve3cko@interpc.ca>
- Date: Wed, 20 Feb 2019 16:37:57 -0500
- There seems to be no controller board available, just the pre-amp, switching and phasing boards. Did I miss something? RX-amps, you will get 10 pieces for 20 euro. Switch-board you will get 5 pieces
- /archives//html/Topband/2019-02/msg00219.html (8,835 bytes)
- 6. Re: Topband: YCCC 9 circle/5 square (score: 1)
- Author: Mike VE3CKO <ve3cko@interpc.ca>
- Date: Thu, 21 Feb 2019 09:27:13 -0500
- Yes George did dig up that manual, I'm going to pick up a used CC-8 antenna switch box that will do the trick. Must have thrown out 4 or 5 printer/rs232 switch boxes before I became a hoarder :) 73,
- /archives//html/Topband/2019-02/msg00223.html (10,468 bytes)
This search system is powered by
Namazu