I have Commscope Andrew AVA5-50 7/8 inch hardline. I purchased the matching Andrew EZfit 78EZNF connectors. The problem is the tool. I purchased the low-cost Andrew MCPT-78 tool which several vendors
The UHF connector has a larger diameter center pin (0.156") than the N (0.1197"), so its current handling capability is (slightly) higher. Actually, the current handling interface of the N connector
Actually not - the center conductor in an N is 0.120" - you might be thinking of the pointy locator pin in the middle (0.063"), but in a "properly mated" N connector, that's not carrying any power. I
Beware of buying 4-hole flange mount female f-connectors online. I had problems with the PCB mounted connectors supplied with the YCCC receiving antenna kits for the chokes, so I purchased "10x F-Typ
Suitable for use for direct burial and moisture protection 3M Scotchkote Electrical Coating FD is designed to use with Scotch® Vinyl Electrical Tapes. It is ideal for use in applications that are sub
So Marsh, how does this "easy fix" work with those reading the digest or any other text-based system? The problem is caused at the sending end, not the receiving end. (pretty common in ham radio, com
Why to crimp on UHF male connectors have solder center conductors? Because the crimp takes up some of the length of the center pin, about one-eighth of an inch on the crimp-on connectors I use on my