You might wanna open that up and check the wiring, see if they are paralleled, whatever.. .. I believe that is a 4 wire control rotator. Mark AA6DX At 03:33 PM 10/12/2003, Wayne R. Hatfield wrote: Wa
And, as someone else suggested, connect the first one way, the 2nd the other ... so no guess which goes where! I usually end up working on rotators in the middle of the night in a storm during SS, or
Actually, the URL is http://thewireman.com :?} Takes PayPal, too! -- Mark AA6DX At 09:42 AM 10/13/2003, Bill Aycock wrote: DannyIf it's available, The Wireman will know, and be able to get it. He als
Here's an LP for 2 MHz to 30 MHz, and also another for 4MHz to 30MHz http://www.antenna.be/rlp.html I installed one of the Sabre 600 aerials, along with their tower, up in Alaska .. http://www.sabrec
Here's brass all-thread ... 73, Mark AA6DX http://tinyurl.com/ukut Have you tried the plumbing department at your ACE is the Place place? I went the Radio Works route of station ground, and have a he
Me too.. I have a 2060A, and intend to keep it ... forever ... unless I get something else! Mine works swell. Mark -- Original Message -- From: <EL34GUY@aol.com> To: <k3bz@arrl.net>; <towertalk@conte
I assume you want a PC N Connector destruction manual? Try here... 73, Mark AA6DX http://www.wireless.org.au/~jhecker/pigtail/ -- Original Message -- From: "George Yazzolino" <> To: <TowerTalk@contes
A ham in Oregon put a tower up for sale yesterday on the 4Øm swap net .. THE TOWER IS LOCATED IN HAYWARD, CA .. Motorized LM-47Ø-- must be taken down, but only $5ØØ !! N7H
Ya done got my curiosity up .. here's what I found ... Mark, AA6DX == Soldering Oxidized Copper Wires (Especially Stranded) Go to the hardware store or welding store and buy a bottle of All-State Duz
I like using a powered capstan, really is the way to go, and you can use a LONG line, whereas with a powered winch with a short cable, you might have to snub off the line a bunch of times up a long t
Here's interesting info on the subject, even using LED.. 73 .. Mark http://www.antentop.bel.ru/004/trap_004.htm -- Original Message -- From: "Jan Erik Holm" <sm2ekm@telia.com> To: <towertalk@contesti
Someone might want to interject the word "PLAT" ... here .. Thankfully, I have CDs with those plats for the local counties... aa6dx -- Original Message -- From: <BobK8IA@aol.com> To: <towertalk@conte
Surplus 50 cal. et al ammo boxes worky worky ... 73 de AA6ÐX L' amour de la T.S.F. est pour nous sacré -- Original Message -- From: "Jim Lux" <jimlux@earthlink.net> To: "Joe Barnes" <n4jbk
Hiya ... I have a nice Prop Pitch motor ready for you to buy .. 45 lbs. worth or so, about 50 lbs. to ship ... Pix on request... drop me a simple email w/request, and I will send you right back the p
OSHA Safety Awards ... have a 450 KB pps file ... great stuff .. anybody want, lemme know ... will email to you direct....Mark, AA6DX _______________________________________________ See: http://www.m
Best to stop by a dealer that handles marine radio equipment ... great ideas there, and most likely you will find the right stuff.... Mark 73 de AA6ÐX -- Original Message -- From: <Lew28@aol.com>
Ahh .. but what I was alluding to .. There are, most likely, a bunch of these 6ØØ that climb, at times, for $$$$ -- I did, for years. Now .. was I counted, or not, in the "statistics".
Hey ... that's a nice item! I have a Chinese one of those, but this looks much better! And a pencil torch. But going to get one of those! The Wal-Mart price is good. On the Internet, found one for $3
Boy .. Noel, I second that! More rules, more rules, more rules! How about a rule Phil, for hams to learn how to safely contest before they can enter the fray? Staying up 48 hours, drinking copious am