Hi David, Thanks for the info. The interference lasts well beyond the ramp up & down. GH had me try the max & minimum speed at 10 to see if it was ramp up & down. It made no difference, the interfere
Grant, Thank you for the info, there's a lot to go through and hopefully something there will help. I'm on a prosthetic leg now so climbing the ladder to the roof to experiment is something I want to
Unfortunately, the link below was altered by my windows when copying & pasting and added characters making the real link munged, maybe for others as well. Here is the correct link but done with tinyu
Folks, Many replied off & online to help me out, some went above and beyond in offering their time and experience and thank you for that, helping others is much of the joy in our common bond. To reca
I use the pneumatic spud launcher I made, see it & the PVC spud at the bottom of my QRZ page. I use 30 pound monofilament and I use large swivels as for ocean fishing at the end of the monofilament.
Rodents again found my control wire for my Ameritron RCS-8V coax switch. I was thinking this is the time to get a remote switch that can send the signal through the hardline and not worry about chipm
Folks, Thank you all for the replies, both direct and on the reflector. I do need, or should I say, best can use 5 or more positions, so a 4 terminal is an issue. That said, I could use one for a 2nd
Mike, I stand corrected, the unit you brought up below is indeed wireless. The person I talked with last night at DXE said their only wireless unit was 4 position. Looking at the cost, I'd probably b
Thanks to so many positive replies regarding the Green Heron remote switch and associated hardware I ordered the same today including the 12V injector. Looks like I'll have to locate the injector out