Al, I bought my fall protection gear from www.tessco.com. I was not able to try them on before so basically paid attention to size and features. The harness I received is excellent. Here are some lin
Does anyone have an installation manual for a Dunestar model 808 remote antenna switch they can e-mail me? 73, Jay N4OX _______________________________________________ _______________________________
Shamless plug Mike, and Tower Talkers. Array Solutions Un-Uns are available. 22 ohm to 50 ohm Un-Uns are made here all the time and we call the Mini-StackMatches. They will handle 5 kW CW. We can cus
Gents, The K9AY new loop is still Gary's great antenna design. It does require a ground but not 1/4 WL radials only some that are say 16 feet long if you need them at all with the required ground rod
The best way to answer these questions is to get a copy of HFTA, which comes with the ARRL Antenna book. It lets you model the pattern of stacked antennas, varying spacing, etc., and factoring in you
Currently Force 12 and SteppIR are the only manufacturers that use our protocol to produce useful comparable performance figures. If Optibeam figures were produced similarly, then I'd be more incline
Clay, The relays we use are specially made for us; they have our part number on them. You have to buy them in qty of 500+ at a time. But I do sell them They are not $45 but $16.00 each. They are USA
-- ONE more time Look guys, LETS PUT THIS RELAY STUFF TO REST. Those relays on my website are 10KW CW high voltage relays, and they are $45.00 these are NOT the 5 KW CW RatPak replacement relays whic
Gregg, I will let someone else take the Stackmatch question. You can go to www.tessco.com for climbing harness options. Just search harness in the search box. You can also key in 417261 for a high en
Anyone have a manual for a Wilson System 3 triband antenna they could send me as an attachment? I thought I had a Wilson SY 33, but the manual and the parts I have do not coincide. Trying to put ante
Take a look at www.normsfab.com 73, Jay N4OX _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lis
My $0.02, Not returning phone calls or emails will kill any business - not good. I hope those of you with pending orders get your antennas. In 2006 I read a disappointing letter(white paper) written
Anyone have a manual for a Force 12 C3 or C3E antenna that they would be willing to copy and send me? I have a C4SXL that I want to make into a C3 or C3E. I will pay copying and mailing costs if you
Bill, If lightning is travelling a mile or so on its way to ground does your friend think that disconnected coax from the rig will stop the strike at the end of the 259 or N connector? Well I sure ho
360' Pirod 24 inch face tower with top beacon and two sets of side lights with turnbuckles. Located in Pensacola, Florida. Seller can load for buyer. Contact Jay, N4OX at n4ox@frontiernet.net for sel
I have a KT36XA in the air at a 100feet in a very windy part of Colorado. The construction took some time but it all went together fine and it has withstood some intense hail storms nearby tornados a
Kelly and all, I work with a double "twin leg" shock absorbing lanyard. These come in a variety of sizes but mine has 2" throat openings so I can easily operate with one hand and get them on a leg of
I have a Wilson 4 element 20 meter monoband antenna that I bought as a NIB used antenna. I thought it was a model M420A, but it is not. Does anyone have a manual for another Wilson 4 element monoband
Roger, The single ground rod that was put outside my service panel was certainly inadequate. I ran a new #2 solid from the box to a new ground rod which is then tied into the remaining ground field.