Well if you like the big side lobes as they give you more coverage in contests why did you cut the beam width of your main lobe in half by using an H-Frame?? <rhetorical question> 73, Jay K0GU ______
This procedure shows splitting both legs of the wrap and then wrapping them. http://www.preformed.com/preformed/files/AppProc/SP2049-3.pdf I have a 20 year old and 11 year old tower using Preformed d
This information is from August of 2009 so you will need to see if it is still valid. I wrote Phillystran asking: I have a quantity of the older Phillystran from before the guy grip system was deploy
If you can afford it you can do it with Phillystran. http://www.phillystran.com/163.htm I'm not sure this has any relevance on anything but most people I know with tall tower often only have one set
Press "s" and you can see the actual element sizes. 73, Jay K0GU _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@conte
Wedge brake rotators do make a sound when the brake is actuated. I had a house bracketed tower ONCE. I could hear all manner of vibrations from the antennas. Yaesu rotators use a worm gear and not a
You are right or course. But they still have no noisy wedge brake. 73, Jay K0GU _______________________________________________ _______________________________________________ TowerTalk mailing list
There was a 144-148-13LB as well as the LBA. Reviews on both are in the ARRL product review section available to members. The teflon coax is a 4:1 balun I believe. I have a smaller KLM dual driven 2m
http://www.technicalspecialties.net/store/Standard_Series_Carbon_Steel_Stauff_Clamp_p30.html They can be purchased much cheaper if you don't want the metal parts and just the insulators. 73, Jay K0GU
If so an EBay search of "glass antenna insulators" will turn up a few. Likely at a dear price. 73, Jay K0GU _______________________________________________ __________________________________________
This seems to be somewhat common on AOL mail. My AOL mail account, as well as another ham friend, was used in the last couple of months to send SPAM out in the exact same manner. I have virus and an
Yes a serious long shot but looking for Create RC5A-3 mast clamps. I got a swapfest special and need the mast clamps. 73, Jay K0GU _______________________________________________ ____________________
Hi all, Need some advice on an OR-2800DC that is about 12 years old. Over the years apparently the soft metal welded to the top plate, that attaches it to the hard steel output shaft, wallowed out cr
No the rotor was inside the tower, had a thrust bearing at the top and there was very little mast above the tower. It rotated a H-Frame with four 7el 6m yagis (~20 sq ft) for 10 years. Not a huge amo
Go to photobucket.com, get a free account, upload your pics and then post the links. I don't want massive size Emails. I get this board in digest mode. http://i509.photobucket.com/albums/s339/K0GU/JH
I am interest in the current state of available ring rotors (RR) for Rohn 45. I will probably purchase one soon. It will only need to handle about 12 sq feet. But I am interested in the different opt
I have a Rohn 45G tower with one run each of 1/2" and 1 5/8" Heliax inside the tower plus a run of 3/4" CATV hardline. Another 45G with a run of 7/8" Heliax. It really goes in fairly easily. I rigged
This document is 12 years old but it's the only one I ever saw that details using cable clamps on PHILLYSTRAN. Use at your own risk. http://www.therfc.com/355.pdf I find it helpful to have something
If you only have one antenna I would go as high as possible if you have good coax. Perhaps tempering the height a bit to keep it away from from big HF antennas to some degree. In the summertime Es is
Here is a link to the free mast calculator. http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=17127 If you do not have Microsoft Office it will run on the free Open Office software. There is also a link