- 121. TIC Ring and CC 2L 40m TRUSS ? (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Fri, 5 Jul 1996 17:54:11 -0400
- Hi Bill... On my 40M4L yagi I made a truss clamp from plate aluminum and muffler clamps offsetting it from the boom center towards the reflector just far enough that it was clear of the boom clamps o
- /archives//html/Towertalk/1996-07/msg00047.html (7,046 bytes)
- 122. Goodbye trapped antennas? (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Fri, 5 Jul 1996 17:53:54 -0400
- << I can't help myself. . . I have this image of you performing antenna experiments standing on the vibrating bed at the No Tell Motel with a plate of pasta in one hand and a yagi in the other. . . I
- /archives//html/Towertalk/1996-07/msg00048.html (9,680 bytes)
- 123. tower base (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Sun, 7 Jul 1996 11:00:43 -0400
- << .in the installation of the rebar cage, what would be appropriate....12",16",24" or what for how close they should be tied together,(ie. on center)?? >> Hi Jeff... Talk with the building inspector
- /archives//html/Towertalk/1996-07/msg00057.html (6,866 bytes)
- 124. Concrete Curing (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Sun, 7 Jul 1996 10:58:39 -0400
- For a large mass of concrete in the base of a tower, letting it dry on its own will not result in significant loss of strength... how many ham towers come down because the concrete base fragmented an
- /archives//html/Towertalk/1996-07/msg00058.html (7,403 bytes)
- 125. KLM KT34A CORROSION PROBLEM (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Thu, 11 Jul 1996 08:13:31 -0400
- << I have sucessfully used NOALOX on a KT-34A. The stuff KLM sends (and sells) with the KT-34 is different and works really well, but NOALOX (or something similar) is readily available at local elect
- /archives//html/Towertalk/1996-07/msg00089.html (7,960 bytes)
- 126. How much "gap" for lightning ? (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Tue, 23 Jul 1996 12:46:19 -0400
- << Question is, how much gap should one leave between the "points" ? >> Just enough that they don't arc over under full power, and no more.... probably in the range of 1/16', plus.... Denny
- /archives//html/Towertalk/1996-07/msg00150.html (6,594 bytes)
- 127. NoAlox, Penatrox, etc (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Mon, 29 Jul 1996 11:00:22 -0400
- << towertalk@paris.akorn.net Can you put too much of this junk on the joints of the antenna? Bill >> Of course, it may drip some on warm days if you _really_ over do it.... don't stand directly under
- /archives//html/Towertalk/1996-07/msg00177.html (6,816 bytes)
- 128. Screw In Guy Anchors (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Mon, 29 Jul 1996 11:00:33 -0400
- I buy my ground anchors from the local electrical power company (Consumers Power, in my case).. they always have them in stock, in many sizes (I use an 8 inch).... The anchors are a half inch thick p
- /archives//html/Towertalk/1996-07/msg00178.html (7,195 bytes)
- 129. using house as a guypoint (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Tue, 30 Jul 1996 15:42:21 -0400
- For a few dollars more than five sections of Rohn 25 plus the two elevated anchors and guys, and the eve guy at the far end of the ridge, etc., (maybe even less dollars :) you can put up Rohn 45 with
- /archives//html/Towertalk/1996-07/msg00189.html (7,586 bytes)
- 130. using house as a guypoint (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Wed, 31 Jul 1996 09:08:52 -0400
- << Since when are hams reasonable? I'd be really leery of hooking a guy to the eave (or peak) of my house if for no other reason than roofs and attachment methods are designed for dead load in the do
- /archives//html/Towertalk/1996-07/msg00196.html (8,421 bytes)
- 131. Thrust bearings (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Thu, 13 Jun 1996 15:36:42 -0400
- << if/when I have to pull the rotor, I plan to pry the mast up and tighten the setscrew that is part of the pointy-top. >> I use two muffler clamps for this... install and tighten one around the mast
- /archives//html/Towertalk/1996-06/msg00089.html (7,089 bytes)
- 132. More tramming advice (score: 1)
- Author: K8DO@aol.com (K8DO@aol.com)
- Date: Mon, 24 Jun 1996 17:11:03 -0400
- All went fine until the beam arrived tractor If you fly with turkeys you will never be mistaken for an eagle..... (old indian proverb) I'm in total agreement with Stan when it is just a bunch of guys
- /archives//html/Towertalk/1996-06/msg00180.html (8,521 bytes)
This search system is powered by
Namazu