Anyone have the boom, etc. within driving distance of Roanoke, VA or Dayton or upcoming hamfests in the PA/MD/VA/NC area ? Alan, N3BJ Bent Mountain, VA _______________________________________________
Anyone have one that is surplus within driving distance from Roanoke, VA, Dayton or hamfests in the Mid-Atlantic/SE area ? N3BJ Bent Mountain, VA _______________________________________________ _____
Anyone have one in decent shape within driving distance from Roanoke, VA or Dayton, Charlotte or other hamfests in the Mid-Atlantic/SE area ? N3BJ Bent Mountain, VA __________________________________
Has anyone calculated the proper torque balance "element" for the KT36XA ? Would extending the reflector end of the boom 20" or so with PVC pipe of the same diameter (to compensate for the longer dir
Anyone have one that is surplus ? Will be attending Raleigh, Dayton and other hamfests in the PA/MD/VA/NC areas and can travel a bit if pick up is required. Alan, N3BJ Bent Mountain, VA _____________
I have end caps for the A3/A4/D3/D4 Cushcraft antennas if you need some to refurb Elliott's traps or have a Cushcraft antenna that needs them. $1.00 EA with free shipping in US/CAN if you buy 8 or mo
Looking for a thrust bearing suitable for Rohn 25 tower: Rohn TB-3, TB-5 or others ? Please let me know if you have one that is surplus to your needs. Alan, N3BJ Bent Mountain, VA ___________________
What's the best way to refurb the spreaders with spar varnish ? I read that somebody "dipped" the spreaders, but I can't envision that unless a real long trough was used... Alan, N3BJ I had a two-ele
Is or was there a commercial version ? _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
I have an older aluminum tower that I would like to use, but not sure of the manufacturer. Thought it was a Heights, but the leg diameters are different than shown in their current designs. The 22" w
Anyone within driving distance of Roanoke, VA have a section of Rohn 25G7 ? This is the 7 FT version of the standard section. Also looking for a 20 FT piece of 2.00 inch, .250 inch wall 6061-T6 mast.
Anyone have a WARC-7 or other Force WARC antenna laying around ? I can pick up within 400 miles of Roanoke, VA, maybe farther if a hamfest is in that direction..... Thanks, Alan, N3BJ _______________
I'll be putting up a tower on the top of the knob this spring. Due to some great slope, HAFTA shows 35 FT to be a good height on 10-20M and 40-45 FT on 30 and 40M. Plan is to put up a 35 FT tower and
Will do, Bill...I inquired about the antenna and was told they now use the Delta 230 elements (loading coils) instead of full size elements as specified in the ad... Best 73, Alan, N3BJ -- __________
Just wondering if a 10-30 mHz log would be more or less likely than a mulitiband yagi to interfere with a 7 mHz beam stacked above it ? Alan, N3BJ _______________________________________________ ____
Want to see what might be out there, before ordering. Looking for a large HF log antenna, 30 FT boom or longer, preferably including 30m, perhaps 40M. Something on the order of a M2 7&10-30 LP8 or a
Hey Dino That is a good scoop ! Will it include 40M and 30M, do you know ? I like the 7&10-30 LP8, wish it had more kick on 40M, but it would probably be fine. I live on top of a mountain here in VA
Is this antenna available ? It's advertised on their website, but not included in the Price List. Any comments on performance if there are some out there ? Alan, N3BJ ________________________________
Anyone have one of these laying around ? This is the 4 wire control box, sits squat. Thanks, Alan, N3BJ _______________________________________________ _______________________________________________
I'll have several refurbed rotors w/controls at Dayton, including a TailTwister, a HAM 3, two HAM 2, a TR-44 and an AR-22. These were inspected, repaired if necessary, lubed, painted and tested by a