Hi and thanks in advance. I have just sent my Ten-Tec Omni-VI to repair for the second time in a year for the same problem. I believe what This is what is happening: When there is an electrical storm
Hi Dave, Take my advice. Hire someone with a small back hoe. They make one for a bob-cat. They will do it much faster and for probably not much more than it would cost you to rent one. And if somethi
Hi to all, I have had a G-1000sdx for four years and no problems whatsoever. For a couple of years it turned a Mosley PRO-67C ( a lot of heavy metal) and held up to 80+ MPH winds. now, however it has
Hi to all, I would appreciate any help or suggestions on where to find a manual (or copy) for an AEA Isoloop antenna. Thanks, Ken W7TS -- Kenneth E. Kinyon 34 Princeton Circle Longmont, CO 80503-2106
A short while a ago I read a message regarding adding a ten meter reflector to a F-12 C3. Of course now I can't find it. I would appreciate any information anyone may have on this subject, especially
Thanks to Steve KJ7CH, I have the info I needed and have ordered the kit from F-12. Thanks to all, Ken W7TS -- Kenneth E. Kinyon 34 Princeton Circle Longmont, CO 80503-2106 Voice/fax (303) 684-0037 E
Hi To all, My experiences with the C3E to this point. I ordered the element from the factory. Although they advised the usual four to six weeks, it actually arrived in less than a week. (4 UPS shippi
Hi Jim and all, I recently replaced a Mosley PRO-67C with a C3. I am extremely pleased with the performance. I am convinced it works better (I work more stations and get more positive comments) on 20
I am curious why you are feeding your C3 with 75 ohm feedline. Ken -- Kenneth E. Kinyon 34 Princeton Circle Longmont, CO 80503-2106 Voice/fax (303) 684-0037 E-mail W7TS@ibm.net --Original Message-- F
Hi Marcel, I apologize for the delay in responding, I just returned from a week's vacation I would highly recommend not buying the PRO-67C. I just took one down after two years. My previous antenna w
Why on earth is this discussion taking place on two reflectors? I assume that those sufficiently interested in contesting are getting it on the CQ-contest reflector so why post a copy to TowerTalk? 7
The spell checker would not care at all if you spelled lose as loose. -- Kenneth E. Kinyon 34 Princeton Circle Longmont, CO 80503-2106 Voice/fax (303) 684-0037 E-mail W7TS@ibm.net Toggling on the aut
Hi to all, I recently saw some discussion about shipping times from Force 12. I don't know if mine is typical, but I thought I would related it. About two weeks ago I ordered a C3 through Texas Tower
The axis of rotation or revolution is the centerline of the mast and the force of the antenna and mast weight is acting downward along that axis if your antenna is mounted at its balance point. No ma
Hello to all: I would appreciate any comments regarding the C-series antennas in regard to performance, construction and ease of installation. I would particularly like to here from anyone who has ha
Charlie, I purchased my tower directly from US Tower. All the paper work was sent to me by mail and arrived before the tower. This included the installation and maintenance instructions and instructi
Hi, I would like see some opinions regarding WD-40 as a Lubricant for cables and pulleys. Thanks es 73, Ken W7TS Ken Kinyon 34 Princeton Circle Longmont, CO 80503-2106 Voice/FAX: (303) 684-0037 Email