This I guess answers a question I was going to ask. I have 20 ft of r25 bracketed to my garage at abt 12 ft. My plan was to put another 10 or maybe 20 ft on it unguyed and with a haze for a 6m5x and
Are you sure its a hygain? I have the hg70hd and the manual but it uses the rear cage with the ears welded....no T plate. Maybe its a us tower model? _______________________________________________ _
Good morning folks. I am trying to clean up the garage and have some items to sell. I have 7 of the older KLM boom to element brackets. These are from a 40M yagi and a 3-inch boom. A couple have TWO
I've had an Optibeam OB12/6 in service for about 6 years now. Not one issue since putting it on the HG70HD tower. It covers 40-10M with at least 2 elements for each band. This is the best built anten
Mike, What are the dimensions of what you need? I have parts of a simmer that used rectangular boom stock that may work for you. _______________________________________________ ______________________
Hi all. I am building a new shack. It is 12x16 to stay under the limit needing a permit and is on skids supported on pier blocks, so there is room to maneuver under the floor. Looking for input on pr
Tnx Larry and everyone else who replied. I think I have decided to go with entry from under the building through the floor using one of the nice gradual curved 90degree bend sections. It will come up
I have similar concerns. I dug a 3x3x5 hole for an MA40 for just a 6M yagi. Pretty much normal soil for the first 3-3 1/2 feed then it got a bit on the sandy side and it seems to stay on the damp sid
If anyone is interested I have an unbuilt kit for the ERC-M with LAN option, rotor card and the enclosure. $150 shipped CONUS. 73 Greg AB7R _______________________________________________ ___________