The 1988 manual consists of 8 pages. View B on page 4 shows the boom clamping. There is a 10 inch fiberglass insulator insert 1" diameter (item95) , a formed alumninum bracket (item 156) used between
That is a lot of antennas on a crankup--what model. how long has it been up, and what windy condx? I have lm470 with only a monstir with no long mast. k7puc __________________________________________
Are you sure that the HDX572 "is the next step up?". I have had both and while the HDX572 looked stronger, with large diameter tubing, the specs was rated less that the LM470 (according to my memory)
The subject antenna is a dual 80/40 linear loaded beam spec'd at >4 dbd at 74'. I purchased it but then put up the Steppir Monstr so have little use for the Mag 2/2 40 meter beam. This Mag 2/2 has be
Actually the M2 controller already has a point and shoot capability. It is just exceedingly cumbersome to use? One has to remember the proper sequence of buttons to get to a menu that allows one to s
I use a 1/2" portable drill with the proper adapter to fit the nut on the k2550 winch. Works well. I stop frequently to let the winch clutch cool off. k7puc __________________________________________
My tower is the LM470 motorized so my use of the electric drill has been for tilting the tower up and down. The drill is labeled HEAVY DUTY MILWAUKEE with further labeling of Hammer Drill Cat #5378-0
what kind of tower? I had a side mount made for the mid section of a crankup that doesnt interfere with extending/retracting the tower. It is for the two element that can be on one side of the tower,
Sorry about this, but I think I was clicking on reply to sender??? k7puc _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTa
SNIP 1. Whys square the hole with a shovel? The only need might be to square up the visible part above the hole! 2. "...wider at the base."? I only have maybe 50 hours using my small BX22 backhoe but
Help, Help! There have been many, many postings on how to set up the radials but never a discussion on why or how radials actually effect the radials as it seems to be "beyond the scope....". It is p
I have two absolute mint condx books that I wont be using: 1 Yagi Antenna Design by DR James Lawson 2 Physical Design of Yagi Antennas by David B. Leeson At this time I wont separate and don't know t