I don't recall seeing anything from the cable companies. Seems to me they should be very much against BPL. Did I miss something? messenger. ___________________________________________________________
I'm with Doug. Rotor change out is so much easier this way. 73 are only weight come-a-long inside plate and Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and as
Lifting a 20 foot 200 lb chrome molly mast with a 5 el 20 and a 2 el 40 is not easy to "lift up a few feet" either. Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any question
My C31XR came with the insulators/spacers. After seeing some comments about big winds whipping elements around. I noticed that if i worked at it and while the antenna was on the groound that I could
Yo Kirk !!! Whats going on top of that mast????? Chet N6ZO -- Original Message -- From: <kirk@kirkandjamie.com> To: <towertalk@contesting.com> Sent: Thursday, December 23, 2004 4:22 PM Subject: [Towe
geo888@cs.com says its not whether the owl is eastern or western but you must take the square root of the wingspan ! chet n6zo -- Original Message -- From: "Eugene Jensen" <eugenejensen@nyc.rr.com> T
Byron The BN-86 has been around for 35+ years and was designed when we could only run 1 KW. Force 12 makes a 3 (b-12) and a 5 KW balun. Radio works I think makes a 3 and a 5 K Balun. If you are going
Remember the operative word here is "modeled" in the models, a bumble can't fly. _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Ok I'll bite, whats wrong with 1:3:1?? This "problem" exist across the whole 20M band?? Could you expand a bit as to why this is a problem? Don't "wait up" for a call from Cushcraft, I reallly would
what huge antenna????? _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-
I hope you didn't for get rule number one. --don't build any part of you swimming pool under any over hanging yagi elements !! chet -- Original Message -- From: "SJ W3TX" <superberthaguy@adelphia.net
technical smechnical!! If he had really wanted to give THIS group first shot at it instead of having some CB'er getting it, it would have been posted here first and if it didn't sell, then he could h
I did exactly what Jerry suggested. One more thing, Two of the Clips on the guy wires that came pre attached to the color coded guy wires on my unit broke on two different occasions. I would recommen
One answer to that problem is very simple and needs only a couple of small pieces of wood. 1. take a vertical stake two inches wide, and 5 feet long, sharpen the ends and pound into the ground 2. Nai
When I first put up my tower (1978) I went to the city. (Chesapeake Virginia) The buildings guy told me "it's not a building" and it not covered in my domain, check with zoning. Went down two desks a
I ordered caps and a coil for one of the elements. Delivered to the door in about 3 days. press on regardless _______________________________________________ See: http://www.mscomputer.com for "Self
Delbert, Lobby for 40 feet and then either get a C3 or its smaller brother the C3SS. Spend the 20 bux and get K7LXC's tribander report to see why. Consider a tubular tower if its to please the xyl. A
After watching a similar discussion on using braid for grounding equipment and right after I had just just finished grounding every piece of equipment with copper braid. W3LPL jumped in with the IEEE
Scott, I assume you mean the 8 wire connection on the bottom of the rotor? The TR 44 and CD 45 I think only use 7 of the 8 connectors. (no brake) Rotor doc is putting the new water proof connectors o
If you don't hear the brake, I think you HAVE found the problem !!! 73 _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather S