I have never had much luck with Liquid Wrench but I have with PBBlaster. Chuck K9LC Yup ! use full/all Galvanized hardware on or where applicable V. zinc or plated steel. mac/mc w5mc I ran across thi
There is a size difference and the attenuation is greater for the RG400 cable than the LMR400 cable. Therefore the connectors will be different also. You can look at the specs for each cable here: L
According to the specification the center pin is soldered, so DO NOT Attempt to crimp the center pin. Purchase some proper coax prep tools it will make the easier and more consistant. DX Engineering
Replacing the neighbor may fix the problem. :-) -- Original message --From: john nistico <electric911inc@hotmail.com> Date: 11/18/19 7:21 AM (GMT-06:00) To: towertalk <towertalk@contesting.com> Subj
They make an Ethernet to fiber converter and an fiber to Ethernet converter but they will probably cost more than you want to spend. But if lightening did strike it would not be able to come into th
You may want to read this concerning Mikcotik. https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.zdnet.com/google-amp/article/thousands-of-mikrotik-routers-are-snooping-on-user-traff
estate and Im confused as to how to price them for> sale.Certainly no more than half the new price.Think of these in terms of:1) what was the original warranty (I assume you're selling as-is)2) What
I have a Diamond X50NA (2m/70cm) that I hope to put up before the snow flies here in N. Illinois. Just wondering if it is recommended to paint fiberglass antennas to protect from UV/Sun damage? If s
Thanks for all of the respones. I'll be using some marine paint on the antenna. Although here in Illinois I may be able to find automotive paint easier than marine paint. Thanks and 73's Chuck K9LC
Not sure but I thought MFJ had a panel to bring cables through a window. No idea on the cost thoigh. -- Original message --From: jimlux <jimlux@earthlink.net> Date: 11/9/20 8:42 AM (GMT-06:00) To: t
hardware store is readily available and is quite cheap. The gauge should be more than enough for the current requirements. Standard Roman cable would also be an option too.Chuck K9LC -- Original m
Try DXEngineering.com and search for "Connector crimp". They have a number of Amphenol connectors for different types of cables listed. Chuck K9LC Everyone here always recommends Amphenol 83-1SP PL-
electromagnetics code) evolved out of a program called BRACT, which>> Burke and others developed in 1967. The most common public version is>> NEC-2. -- Thanks to Jim Breakall, WA3FET">>>> I didn't re
Ask if the school has any lifts. My high school did for painting and adjusting lights on the stage. Knowing if the do and the height and lift capacity my help in determine how high.On the other han
This seems like a big discussion for something that is very simple. For me the messages come to my email and I can respond back in the email. So for me if the reflector is changed I just need to sub
The schematic for the MFJ 4125 power supply may be found here: https://mfjenterprises.com/collections/power-supply/products/mfj-4125#product-manuals Chuck K9LC Any help would be welcome. Thanks, Dave
try This and let us know if it works. How to Perfectly Clean Wires in Minutes!!! - Instructables <https://www.instructables.com/How-to-perfectly-clean-wires-in-minutes/> For some reason my keyboard q
I used a NE-2 neon bulb for this in my early days. Not sure if you can still find them or not. I could see it flash occasionally during thunderstorms. Chuck K9LC Rob K5UJ __________________________
According to Google beeswax will melt if heated slowly to 140 deg. It seems like it may be easier to pply this way.Chuck K9LC -- Original message --From: w6rgs <w6rgs@cox.net> Date: 9/22/23 9:19 PM
Mouser.com sells small air/moisture vents bade by Bud Industries for this purpose.Chuck K9LC -- Original message --From: Shawn Donley <n3ae@comcast.net> Date: 10/16/23 2:00 PM (GMT-06:00) To: towerta