Hi all, I have a AB577 mast and I need to put a rotor on it - if someone out there has done this and would like to share your approach with me, please drop me a line. I built an adaptor I am not comp
AB577 Owners/Experts - Thanks again for all the input on my previous question about mounting a rotor on my AB577. I was missing the "mast adaptor" and got one from K4TMC - works great. I put my AB577
My thanks for the input on my AB577 vibrations, and my apologies for not getting back to the topic sooner. I put my AB577 up using new 3/16" cable with turnbuckles, clamps and what not. The cables th
Towertalkans - I'd be interested in your experience or thoughts related to the following antenna options. I currently have a Force-12 C3E at 65'. I have other antennas for 15 and 10 and I am debating
Folks - for a 2x2x4' Rohn 25 base concrete foundation, do I need to use a concrete vibrator during the concrete pour? dana _______________________________________________ ____________________________
Howdy - I assembled a new LJ-105CA 5 element Hy-Gain yagi for 10 meters this past week. I put it up temporarily on a mast to work on it. For some reason 3 of the 4 5" stainless steel bolts on the mas
Is the antenna mast (top) clamp that comes with a G-800DXA rotator identical to the optional GC-038 support mast (bottom) clamp? My top clamp got cracked and I have an extra GC-038 around here somewh
Thanks Jim and Mike... dana _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com
[Not sure if this got sent the first time, apologies if duplicate] Hi, My 4 Element 20m yagi is on a 15' mast on a Yaesu rotator in a TX-455 US-Tower. Over the last year, it has become slow to turn a
Thanks Dave. The Yaesu rotators have DC motors so I don't think this is the same problem. Dana _______________________________________________ _______________________________________________ TowerTal
Hi, My 4 Element 20m yagi is on a 15' mast on a Yaesu rotator in a TX-455 US-Tower. Over the last year, it has become slow to turn across the NorthWest direction, working fine in other directions. As
Hi all, Thanks to everyone who responded to my email below. I have resolved the problem, which, long story short, was the thrust bearing. The bearing on the TX-455 has a "Eccentric Locking Collar". W
Dana _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/tower
My TX-455 is in a fenced property but I'm gone a lot so years ago I built anti-climb panels for it out of wood. I found someone's design that worked well. However, wood warps after a decade or so, ev