You are correct Jim My apoligies for using the word separte in a SPG system. Very well put.Thanks. 73 Joe K4XZ -- JOE PATRICK SENIOR PLUMBING/MECHANICAL INSPECTOR CITY OF BOYNTON BEACH ______________
Tom I agree with Drax.Buy one borrow one, or think about renting a crane.Little more expensive but saves a whole bunch of time. If you buy one get the kit and obtain the tubing locally.That will save
Rudy A big pump is one way to do it. They call it well point where smaller lengths of pipe are driven into the ground around where you want the foundation. these are then connected to a larger pipe a
It could be a bad idea depending on what your turning and how high above the rotor the load is.On the other hand My G-1000DXA has 20' of mast 15' above the top thrust bearing, 5' above the bearing is
Hi Alfredo I have a desk that came from a used office furniture shop. It is truly heavy duty and weighs a ton.The guy took $10.00 just to get it out of there. You might want to think about a chair al
The QST article certainly has some good information in it and is well worth reading. I think Roger has the best view so far which is a rider on your home owners policy that specifically spells out wh
I agree if you have a permit and reviewed plans that show the the base 6" above grade then that's what the inspector will want to see. Or a plan revision read that as PITA. I assume when say you side
David I think you have found one the tricks to pass inspection. Trust me when I say the inspector does not want to fail your inspection he wants to pass it. He does not want to come back 4 times to d
Clay if it was not for bad luck you would have no luck at all. But I do like your Building Offical he has got the picture. Good luck. -- 73 K4XZ Joe Patrick __________________________________________
Well David that's true. Like I said there is always someone that just must complain. I think also that it's not just the inspectors but the neighbors who call and complain. Then the BO hands it off t
Thanks David I wish there more people like you that have some insite of the system. There also needs to be more well trained Inspectors because they do cause alot of these type of problems. Like Clay
Hello Frank The C3SS is great antenna. It should play very well for you.The 20 meter driven element is split with an insulator. But each side is still about 18' long. None of the other elements are s
I run Lithium ion batteries in my 269.Long shelf life and no problems after 2 years. I just turned it on 17.8 volts. You can pull the pouch over the knobs gently but surprise you won't be able to rea
If you want to oppose this ordinance and you do.Then do it before it becomes law.The way to do it is in an orderly,educated,calm manor. All the clubs in your are should get together and form a plan t
Hello Rich You need to contact http://www.m2inc.com/ for the correct dimension. I have a 6M5X but the manual only states the O.D. A check on their web site reveals the same. Both DX Engineering and T
Good Morning James Pay a visit to your County Building Official. While your there stop by the Planning and Zoning Department.Be sure your property is under their jurisdiction. Some Municipalities hav
Hello Tony The 2 thrust bearing method works well if you run 2 TB. If you don't take a piece of angle iron and a saddle clamp. Make sure the angle iron is long and strong enough to slide thru the tow
Hello Tony I would re-think your scheme. If not I want to see the video when you do it. -- 73 K4XZ Joe Patrick _______________________________________________ ________________________________________
Author: Joseph or Ruth Patrick <hdmc38@bellsouth.net>
Date: Wed, 2 Sep 2009 08:04:07 -0700 (PDT)
Good morning Jim I don't see many other distributor's that stock the IS-B50HU-CO. Davis RF lists them but you have to call for a price. If you run the IS-B50LU-CO you can save your self about $10.0