- 1. [TowerTalk] New Tower Install (score: 1)
- Author: Rob Matherly <jimrob@gmail.com>
- Date: Mon, 25 Apr 2016 16:42:13 -0500
- Hi All - First time poster to the list, long-time lurker. I'm getting set to install my first tower after having been in the hobby for nearly 20 years. I'm going to install 40' of Rohn25 with a Hazer
- /archives//html/Towertalk/2016-04/msg00431.html (7,596 bytes)
- 2. [TowerTalk] Update on 40' non-guyed tower question (score: 1)
- Author: Rob Matherly <jimrob@gmail.com>
- Date: Thu, 5 May 2016 11:08:56 -0500
- A couple weeks ago I asked about self-supporting a 40' Rohn 25 tower. After input from the list and a no-vote from the Missus on guy wires strung across the yard, I've gone back to my original plan t
- /archives//html/Towertalk/2016-05/msg00101.html (8,286 bytes)
- 3. [TowerTalk] Masting source (score: 1)
- Author: Rob Matherly <jimrob@gmail.com>
- Date: Sat, 28 Dec 2019 10:26:06 -0600
- Hi All - Could someone point me to a source for antenna mast? It needs to be strong enough for my A4S and 10-element 2m beam. I was thinking 10' in height, is that too much? I've not had an actual be
- /archives//html/Towertalk/2019-12/msg00166.html (7,204 bytes)
- 4. [TowerTalk] Twin lead spacing (score: 1)
- Author: Rob Matherly <jimrob@gmail.com>
- Date: Fri, 5 Jun 2020 10:58:35 -0500
- Hi all - How far would multiple runs of twinlead need spaced from each other? Would it need to be more than what you'd offset them from a tower? Thanks, Rob Matherly, W0JRM Centerville, Iowa - EN30nr
- /archives//html/Towertalk/2020-06/msg00016.html (6,657 bytes)
- 5. [TowerTalk] Testing A3S Traps (score: 1)
- Author: "Rob Matherly, W0JRM" <jimrob@gmail.com>
- Date: Mon, 29 Mar 2021 17:52:28 +0000
- Hi All - I have a disassembled A3S that I'm putting up. I'm 90% positive the traps are OK, but I would prefer to test them before assembly. I read on using my MFJ 259 analyzer with a resistor to test
- /archives//html/Towertalk/2021-03/msg00325.html (6,824 bytes)
- 6. [TowerTalk] Rotator won't turn east (score: 1)
- Author: Rob Matherly <jimrob@gmail.com>
- Date: Wed, 4 Aug 2021 12:10:26 -0500
- Hi all - Question that's hopefully got a simple answer. I have a bell rotor that was recently overhauled. I hooked it up to my controller before installing it on the tower and verified that everythin
- /archives//html/Towertalk/2021-08/msg00002.html (8,109 bytes)
- 7. Re: [TowerTalk] Rotator won't turn east (score: 1)
- Author: Rob Matherly <jimrob@gmail.com>
- Date: Thu, 5 Aug 2021 14:46:07 -0500
- Hi Nick - it's a north-centered rotor and box. I'm wondering if the rotor is just *set* to north, but is setting on the tower with "north" to the "south", with the antennas themselves pointing north.
- /archives//html/Towertalk/2021-08/msg00007.html (10,836 bytes)
- 8. [TowerTalk] Interesting article (score: 1)
- Author: Rob Matherly <jimrob@gmail.com>
- Date: Thu, 8 Dec 2022 10:35:30 -0600
- Check out that 9" coax https://www.jeffgeerling.com/blog/2022/1-million-watts-rf-how-fm-supertower-works Thanks, Rob Matherly, W0JRM Centerville, Iowa - EN30nr http://w0jrm.robmatherly.com NAQCC #768
- /archives//html/Towertalk/2022-12/msg00091.html (6,807 bytes)
This search system is powered by
Namazu