I'm in need of one of the three bracket pieces for a old Rohn GB45 guy bracket. Anyone have an extra out there?? / http://s509.photobucket.com/user/K0GU/media/temp/Bracket5_zps5c7ab533.jpg.html/// 73
http://s509.photobucket.com/user/K0GU/media/temp/Bracket5_zps5c7ab533.jpg.html Sorry not sure where the three extra slashes came from at the end of the link. Hope is one works better. 73, Jay K0GU _
I got one from someone here on the reflector. Thanks Dan!!! 73, Jay K0GU _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTa
I see at least one Rohn 45 seller's web site that calls the tabs on the 45AG4 top plate guy tabs. However I don't see any reference to that in the Rohn documentation. Except for dimensions Rohn doesn
Thanks for the input. FWIW I was trying to raise the top set of guys to get a bit more clearance for a yagi that will be on a ring down the tower. Also my mast is very tall and it seemed a good idea
You mention 600 UF. I've used a fair amount of it and found very poor life with the stuff. Poor resistance to UV and easily abraded if it rubs against something like the tower top in a rotator loop.
Is there a computer rotator program out there that will allow you to slave two computer controllable rotators? I will soon have a vertical stack of two antennas. One on top the tower (OR-2800) and on
Green Heron controllers are very nice. I have two of them on another array. However what I don't have at the moment is the money to buy more. I can, of course, use two different rotor controller prog
Here is a crazy long link to the installation PDF file: www.preformed.com/index.php%3foption=com_phocadownload%26view=category%26download=724%3abig-grip-dead-end%26id=44%3aapplication-procedures%26It
Shireen RFC600 is quite a bit cheaper than Jefa. https://www.shireeninc.com/osc/cables/coax-cable/rfc600.html There was previous discussion about RFC400 but I don't see anything on 600. http://lists.