The link was bad in my previous post. Try this: http://www.jamestowndistributors.com/userportal/main.do _______________________________________________ _______________________________________________
I might actually give this idea a try this fall. You could roll out the chicken wire in several directions and tie it into the normal radial system for some increased performance (?) during the winte
This is exactly what I do. I use SS hardware and Noalox between the lugs and aluminum base plate. The base plate is on top of some gravel so it's not sitting directly on the dirt. This has worked wel
If you find a plastic enclosure that will work for your application, paint it with paint specifically made for plastic. Such as: http://www.krylon.com/products/fusion_for_plastic/ It's worked great f
Time for a new thread! I ran across this the other day. Apparently these devices are used all the time on aircraft. http://www.repeater-builder.com/antenna/static-buster/buster.html Click on the "ELE
But ice DID start the chain of events! _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.con
Allan, Check out: http://www.arraysolutions.com/Products/staticsurgecoils.htm Should give you some ideas. Cheers, Stew K3ND -- On Tue, 1/12/10, vk3pa@vk3pa.com <vk3pa@vk3pa.com> wrote: ______________
A truly beautiful station Bill. You have always been loud at my QTH in SE PA! Since your station is now for sale, I guess the big question is WHY? 73, Stew K3ND ______________________________________
K3WW has a 3-stack of Skyhawks and made something like 6.4 Meg last weekend in the ARRL CW DX contest. His locations is decent but not great so his system really works. 73, Stew K3ND ________________
FYI.. K3WW has a stack of three Skyhawks at 30/60/90 ft and it works great. 73, Stew... _______________________________________________ _______________________________________________ TowerTalk maili
I think the station was N5RM (now SK I believe). I probably have the article in my files somewhere and could find out what year/issue if anyone's interested. 73, Stew K3ND ___________________________
WOW, what did you have up there that sheered a bolt like that? SNIP _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@co
George is dead on with his comments. I used a "modified" PP for many years. It worked fine but needed to be fixed about every two years. The standard "modification" consisted of cutting off the top-m
Check out KU3X's website. I have one of his antennas up now (20-40) as a sloper SE. The antenna works well. http://www.angelfire.com/electronic/hypower/ 73, Stew K3ND ________________________________
I have an original TH6 (before the DXX). It's been rebuilt a number of times. AFAIK, the only difference between the original and the DXX was the boom to mast mounting hardware. The newer used the Hy
It's nearly that time of year again. Today we had fall arrest training at my workplace by Capital Safety. An excellent demonstration! Anyway, check out the following link. They have a great online ca
Ron, In the "industrial" world, the only allowed equipment is the full body harness. nothing else is allowed to be on the job site on in the plant. Of course at home, you can use whatever you wish. G
I've noticed the same thing at my work place. We have a 400FT tower painted in the red/white configuration. At night it has red lights and then switches to white strobes during the day. 73, Stew K3ND
That is VERY scary!!! _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailm