I am posting this for a friend and he requests any responses, help or assistance, off reflector, direct, to him (Bill - KN4N kn4n60@yahoo.com) Please do not do a reply to the reflector as he will not
Crap... it is even below Jr. High level... down to Kindergarten! And me sending this comment is just about as bad! No more out of me! I have entered those that are involved in this silly exchange int
Twas the night before Christmas, And all through two-meters, Not a signal was keying up Any repeaters. The antennas reached up To catch the weak signals That bounced from the sky. The children, Tech-
Gary... the array you are talking about was made by Hy-Gain... the boom was Rohn 45 (not 25) and the boom was longer than 64'... don't remember the exact dimensions. We used Hughey's to put our up...
Jerry... one caveat that all need to be aware of... due to the fact that the DSL data is "riding" around a much higher reference - above the 'POTS' - one should make sure that the filter does NOT att
Bob... I am starting to hear more and more of the "negatives" about PolyPhaser and their turning away from us 'hams' and this gives me some concern... we, at our business, are starting to look at inc
Some items gone and some added... Want List: 1. Night vision scope... will need details if you have something! 2. Flat screen monitor; 15" min prefer 17" or 19" 3. Wireless (RF) mouse & keyboard for
There are several types of silicone grease and these different types do react at different frequencies and at different power levels. Check the Dow Corning web site and one should be able to find thi
Kevin... did you use the 50' of 7/32" cable that came on it? Or did you replace the cable by using that came on the tower? Paul -- Original Message -- From: "Kevin Adam, Webz By design" <n9iww2@veriz
Same here... we have had 3 pools put in over the last several years at different locations (2 in GA & 1 in NJ) and codes required the entire rebar cage be bonded around the circumference with one con
Kevin... help us out... found some winches on WW Grainger site but not what you are referring to. 96-feet for less than $2000! at 888-833-3104 <A www.ChampionRadio.com</A> 96-feet for less than $2000
Posting this for a friend... PLEASE, all responses to go to Rick, KD4RFK, rpatchin@bellsouth.net or rpatchin@msn.com ~~~~~~~~~~~~~~~~~~~~ Rick has a Hy-Gain TH2 MK3 - 3 element beam and needs the fol
I would suggest one correction to a comment made and I quote: "It's easy to solder any other wires...."! Please, never solder any grounds! The low melting point of solder will cause the joint to disi
Northern Tools has about the best selection of winches of anyone in the country... if you do not have one of their stores close by, try this URL: http://www.northerntool.com/ Paul - K4BET
72' Self-Supporting Crank-Up by US Tower. $500.00 (sells new for about $3,000.00 + shipping of about $1,000.00 from factory) Tower was totally collapsed down to about 22 or 23' and was being lowered
How about setting up a small picket line with signs in and around his booth? spent, waiting previous year base I List Sponsor: ChampionRadio.com - Trylon self-supporting towers, safety equipment, rig
I have been asked to appraise a SK's station for resale... I would appreciate your thoughts as to the value (keeping in mind, the widow wants to sell the station as a complete package & not break it
For sale, Swap, Make offer & some wanted items (bottom of list)... ALL + UPS shipping from 30045 (except antenna); will be at Dalton, GA Hamfest (2/24/01) & if send funds, will take to Dalton for you
Need a repeater enclosure? Need a cabinet at the base of your tower for remote systems? Rittal outdoor weatherproof equipment housing, "CS" series, BRAND NEW, double walled, cooling fans, battery hea