I am going to put up a Hy-Gain TH7DX this spring, and would like to have opinions from those who have used both the Tailtwister and the Yaesu G-1000SDX rotors. Which one seems to be the better in ter
Thanks for all the replies. I really got a bundle! Lots of good ideas too. Looks like the AlfaSpid has quite a following, and the Yaesu and Tailtwister are nearly equal. Thanks again.... 73, Charles,
I am looking for personal experiences with Glen Martin roof top towers. The reviews I have read in eHam were not very good, and would like to hear anything anyone has to say about these units. I am c
Does anyone have information on a Tri-Ex model HZE-354 tower? This is a 3 section 54' motorized crankup. I'm looking for a manual, engineering drawings, specs, base requirements, anything that I coul
Does anyone have a manual, parts list, schematic, any info at all on this rotor? It uses a 1/2 hp 120/240 volt AC reversible motor and a double worm gear drive to a chain driven coupling that the mas
Am looking for a rotor plate for a Tri-Ex HZE-354 tower. Any of the HZ series would probably do. The top section is essentially the same inside size as Rohn 25, except of course the mounting is diffe
Am looking for one, possibly two selsyns (also known as synchronous transmitters, or control transmitters) for an old Telrex rotor. They are model number 2J1G1 and were made by a number of different
Am looking for an on-line source for replacement tower bolts, pins, etc. Stainless, galvanized, high strength, etc. Anyone have a favorite place that you've ordered from before and had a good experie
I am in the process of restoring an old Tri-Ex HZE-354 tower that dates from the late 60s. Karl has been very helpful in this process. He has all the parts I need including replacement pulleys, cable
Can anyone that has a Tri-Ex motorized tower tell me what brand and model number the limit switches are? I aquired a used motorized Tri-Ex tower, but only the motor came with it, no control box, no l
All, A further issue with these ICE coax suppressors is that the box itself is not waterproof. I have three of them and they are built using a one piece solid box (rectangular aluminun) with a top an
I have several hundred feet of Cablewave FLC12-50J hardline. My question is this: can this stuff be direct buried? Is the covering non-contaminating? It is black, but I don't know what material it is