Hello All: Has anyone had any experience in installing either the US Tower MD 75 or the MD 750 Motor Drives on an HDX 555 Tower? Any problems? How do they perform? I am looking to motorize my HDX 555
Hello All: Are there any articles or websites comparing SteppIR antenna performance to other manufacture's products? I would like to see how the specs compare and what actual operating experience is
Hello All: I need to change the RG-213 coax to my HyGain TH-5 MkII and the Rotor Cable to my HyGain T2X. The run is about 100 feet for each. The coax and rotor cable were put up new in 1999. I figure
Hello All: Thanks for all of the responses. If it was good, I would keep too! But unfortunately, it is not. The jackets on the side facing the East Wind are beginning to show signs of cracking. We ha
Hello All: I have been looking at the specs for the HyGain TH-11DX, 5 Band Beam. Does anyone have any experience with the performance of the TH-11DX? Is the MFJ rendition of the TH-11DX as good as th
Hello All: Thanks for all of your great replies. They have been very helpful. I now have a lot of good information to consider... 73, Hello All: I have been looking at the specs for the HyGain TH-11D
Hello: I recently bought a new M2 OR2800 Rotor that comes with a cable terminal housing unit that is used to connect the cable from the rotor to the lead-in cable. I am installing the OR2800 in a U
Hello All: Does anyone have any expedience with the Green Heron RT-21 or RT-21D Rotor Controllers? How good is their accuracy? How well do they work with an OR2800 Rotor? Thanks in advance for y
Hello All: Thanks to everyone who responded to my question. I really appreciate your input! I read the specs on the unit and thought that it would be just what I was looking for. But I also wanted
Hello All: Has anyone on the reflector ever replaced the cables on a HDX555 Tower? I have the cabling diagrams from US Tower, but wanted to know if there are any secrets or anything I should know abo
Hello All: I am planning to re-cable my US Tower HDX555 tower this year. Does anyone in the group have any suggestions or "Do's and Don't's" that would help me? I already have the cables that I bough
Hello Steve and all that responded: Mine is real damage to the wire rope. Where I live in Utah, we periodically get very high winds coming off the eastern mountains (110 MPH Plus). We lose trees, roo
Hello All: I am interested in seeing if anyone has had experience in replacing the Fulton hand winch on a US Tower HDX-555 with the TRX 80HD Raising Fixture, with an electric winch - preferably a 120
Hello All: I have a Fulton K2550 Break Winch on my TRX-80 Raising Fixture that I use to lay down my UST HDX 555 Tower. Sometimes, when I have used it in the past, I have found that I need to manually