I just received a catolog from R and L Electronics and the have listed BX Towers being Mfg by Thomas & Shelby http://www.criticaltowers.com/BX%20Series%20Towers/Web%20Pages/BX%20Series%2 0Tower% 20Pa
I can't seem to find any info on this Hy-Gain antenna. I know its a 2el but what's the boom and element length? If it uses shortened elements, how are they shortened??? Thanks Larry WA2SRY Durham, NC
Thanks for the quick replies It is on the Hy-gain site. I looked but didn't see!!!! Does anybody have any knowledge of the performance of antenna(Discover 7-2) Larry WA2SRY Durham, NC
There is a listing on e-bay for a cdrom with the manuals for most of the = cdr rotors and the hd-73 1947559179 Larry WA2SRY Durham, NC -- StripMime Report -- processed MIME parts -- multipart/alterna
I did try to research the rotor plug, there is a name and number on it. Its a Japanese mfg(surprise). I found the mfg on the web but could not find a "retailer" so ended up paying that ridiculous pri
3M-Scotch-Brite Try any home center, Lowe's Home Depot etc. I buy them all the time to clean the carbon out of my skeet chokes. I'm using them now to clean up the legs on an old Universal Tower. Larr
Anybody know of a source for a water proof plastic utility box. I want to mount it to the base of my tower to hold the power and hand control for my winch. No power will be in it, just won't have to
You might want to look at OptiBeam OB6-3M 10ft boom 33lbs two element on 10-15-20 the 20mtr are folded back toward each other horizontally http://www.arraysolutions.com/Products/optibeamob6-3M.htm La
I have a Universal tower(yes I know it aluminum) I purchased a new base. = The base is three square tubes 4ft long with a u welded to the top for a = steel sleeve that the bottom section of tower sli
"I have a Universal tower(yes I know it aluminum) ............bolts out = but can not remove the sleeve.=20 I called Universal and they said to grind them off. ........" Thanks for the replies. Conse
I'm using LMR400UF and was informed by Steve Davis of Davis RF that it is not suitable for direct burial. They sell a cable called "BURY FLEX" that is very close to the LMR400UF and a good price. Lar
I guess I'm confused I just buried some 3" PVC from the tower to the = house(100ft) about 6" down. I use a tee at the top of the pipe at the = tower come out the side with a short nipple to a 90(wide
I'm using LMR-400uf . Its working well, I didn't try the LMR-400 because of the rotor loop. I've had good luck and pricing from Davis RF www.davisrf.com. They also offer there own version called bury
Back in the early 50's my parents had a 50ft telescoping mast up on the = crest of a hill about 500ft from the house. This was the only way for TV = back then(southerntier of western new york) We had
I was quite surprised that LMR400 is not suitable for direct burial!!!! Larry WA2SRY -- StripMime Report -- processed MIME parts -- multipart/alternative text/plain (text body -- kept) text/html --