- 1. [TowerTalk] Help with Yaesu G-800DXA (score: 1)
- Author: Mark Adams <msadams60@gmail.com>
- Date: Wed, 25 Jul 2012 19:26:58 -0400
- Hi Gang, I've had this rotor up for a few years but this spring problems cropped up. At first I could not get rotation if the speed was anything less than HIGH. Then the rotor would only turn a littl
- /archives//html/Towertalk/2012-07/msg00301.html (8,071 bytes)
- 2. [TowerTalk] Yaesu 800DXA Followup (score: 1)
- Author: Mark Adams <msadams60@gmail.com>
- Date: Mon, 8 Oct 2012 23:13:57 -0400
- Hi Gang, In July I asked for help with my rotor issues and my initial notes are below. Today I finally lowered the tower, removed the mast and stack to see if anything was binding. The cabling was fi
- /archives//html/Towertalk/2012-10/msg00087.html (8,964 bytes)
- 3. Re: [TowerTalk] Yaesu 800DXA Followup (score: 1)
- Author: Mark Adams <msadams60@gmail.com>
- Date: Tue, 9 Oct 2012 09:02:59 -0400
- Thanks for the replies gentlemen. I am going to order connectors. In the meantime, I'll get some DC to pins 4-5 with the rotor on the bench and see if it turns OK. Seems like I rarely have problems t
- /archives//html/Towertalk/2012-10/msg00098.html (9,106 bytes)
- 4. Re: [TowerTalk] Yaesu 800DXA Followup (score: 1)
- Author: Mark Adams <msadams60@gmail.com>
- Date: Tue, 9 Oct 2012 21:11:23 -0400
- UPDATE!!!! I have the rotor on the bench and open. Looks FB for sure. Apply 12.5V directly to pins 4-5 on the rotor connector. Hear a click and nothing moves. Reverse the polarity and touch the pins
- /archives//html/Towertalk/2012-10/msg00123.html (11,322 bytes)
- 5. [TowerTalk] Yaesu 800DXA Followup- FINAL (score: 1)
- Author: Mark Adams <msadams60@gmail.com>
- Date: Thu, 11 Oct 2012 13:03:41 -0400
- If you've been following this thread you'll be glad to hear the results from my latest and final testing. I disassembled the whole shebang and tested without the gear train attached as follows using
- /archives//html/Towertalk/2012-10/msg00144.html (7,722 bytes)
- 6. [TowerTalk] Yaesu 800DXA Followup- FINAL FINAL (score: 1)
- Author: Mark Adams <msadams60@gmail.com>
- Date: Mon, 12 Nov 2012 14:43:38 -0500
- Hi Gang, The last post on this thread was October 11, and if you followed along you might have wondered what FINALLY happened. Well, I am happy to that the rotor is back in the tower and everything w
- /archives//html/Towertalk/2012-11/msg00087.html (7,617 bytes)
- 7. [VHFcontesting] 12V DC Rotor Control Options for VHF Rover Station (score: 1)
- Author: Mark Adams <msadams60@gmail.com>
- Date: Fri, 19 Aug 2016 17:27:23 -0700
- Hi Gang, I just tried to purchase an MDS RC1-Y to use with my Yaesu 800DXA rotor. SURPRISE! The order was cancelled and they refunded my money. Hmmmm. Assuming this is not just an oddball mistake, I
- /archives//html/Towertalk/2016-08/msg00238.html (7,790 bytes)
This search system is powered by
Namazu