Take a look. https://jkantennas.com/jk-navassa-5.html 7 3 Bob N2SCJ --Original Message-- From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of terry burge Sent: Friday, February 8, 2
Assuming the "F" in F12 stands for Force. Check out https://jkantennas.com/ 7 3 Bob N2SCJ Hello guys... I cant seem to find the F12 reflector anywhere. Contesting dot com use to have all the reflecto
Notepad can open just about any file. Once its open you will see the raw file. Odds are the data will not be useful. If you then "save" / write that same file it will probably be corrupted so that th
The less reflected power seen at SWR meter the better the SWR looks. One way to reduce reflected power it to loss / loose it on the way back. Bob --Original Message-- From: TowerTalk [mailto:towertal
Mine did not have any protection. I purchased it about 1995. I sprayed cold galvanization on it. It's been out in wx since then. Some rust stains where I scratched galv during install. No noticeable
My coax and rotor cable has been laying on my roof since 1992. I swapped it out and the roof tower about 2000 for a roof replacement. I also have 2" copper flashing coming down from roof tower also l
Look at the IOTA line of (switcher) PS. I first heard about them on the RFI reflector about 10 years ago. I've had mine for about 5 years. They are RFI quiet, at least my DLS-75 is. Its a 3 or 4 stag
ABRIND.com 400UF is more flexible then Times Microwave 400UF. I have both types of cable in my rotor loop. I'll be ordering the ABR 400UF for any new purchases. Bob N2SCJ I bought LMR400 once and it
The GH RT-21 appears what I need to both replace a failing G-1000DXA controller and add a computer interface. My G-1000 has 450 degrees of rotation. I thought the GH line of rotors worked with the G-