I received a note from Bob today saying that he uses three different feedlines from his C-31XR for SO2R and also throws into the mix his 2el 40m Yagi that you can see on his tower. He says it all wor
I sure do remember the Gotham antennas. My first antenna was a Gotham V80 vertical which operated on 80 up through 10 meters for the cost of $16.00 and some odd cents. The antenna consisted of two 12
Well my paper route would only allow for a V80 in 57 as KN1BFX, dropped the N later that year. It would be interesting to find out who the owners were and if they were hams. As for K1JYN and W1CMH. C
I would appreciate hearing from anyone via my above email address who is using the KT36XA by M2. Thank you in advance. 73 Pete N4KW _______________________________________________ ___________________
I called them back in late May and asked about the availability of a C31XR and was told they did not have any and did not know when they would. 73 Pete _______________________________________________
I did a Google search for Bees Wax and a large number of companies came up. I ordered mine from a company in Texas. I have been unable to find their business card that was sent with the wax. You will
First let me say that I have no experience with the Skyhawk other than knowing two fellow hams who owned one. I have been in the process of downsizing and after speaking to a number of people and res
Serving tool is simply a narrow plate with a small hole about 2 inches from one end. I have seen them with two little fingers at the same end that are used to kind of guide the tool around the guy wi
I would guess if you wanted one you could have an Italian ham purchase one and ship it to you. The only things that I see that are a lot like StepIr are the motor housing and control equipment. At le
I had an Ameritron for a number of years and was downsizing and decided to replace the switch as it was starting to rust. Before I did that I wanted to see how the switch fared with a simple test. I
Greg, This is a great antenna and I used one for about 8 years. My situation was a bit different, I had 105' AB105 tower and had two large monobanders above it. I dropped a wire from the top of the t
I am looking for any information regarding a vertical called The Match Stick. I believe, that it was made by the Johnson Co., but not sure. My Elmer had one back in the late fifties early sixties. If