Hello, I'm very interested in the discussion on the list. I would like to erect a tower in the eventuality. Does any one have a really GOOD primer for tower instruction, pictures of guy installation,
Catalog (available thru Champion Radio - >www.championradio.com). While this is specific to Rohn products, it does contain lots of useful information. In addition, >you can search the towertalk arch
limit the height of structures,It depends on the >zoning where your tower is located.In the city I reside in the LDR(land development regulations)limit the height of any >structure in a residential
Author: "William H. O'Hara III" <ohara@aaahawk.com>
Date: Wed, 15 Oct 2003 21:23:41 +0100
Does anyone know the size of the tubing used for Rohn 25? Is it 1 3/4" or 1 5/8"? Also does anyone know of a supplier? I've called a zillion local metal shops and suppliers. Most only do a unique pro
Author: "William H. O'Hara III" <ohara@aaahawk.com>
Date: Fri, 24 Oct 2003 19:57:10 +0100
I have not seen any that cover 40 to 10. I've seen 30 to 10 at several places. IMHO LPDA should be a long boom with wide spacing between the elements for optimum front to back over a wide range. Some
Author: "William H. O'Hara III" <ohara@aaahawk.com>
Date: Fri, 24 Oct 2003 21:07:12 +0100
There is no commerical LPDA marketed for amateurs produced in America for 40 meters to 10 meters AFAIK. I have seen several designs for for 20 to 10 or 30 to 10. Show me one for 40 to 10. I'm not tal
Author: "William H. O'Hara III" <ohara@aaahawk.com>
Date: Sun, 26 Oct 2003 20:13:24 -0000
I have reviewed the website for Titanex. Does anyone have any impressions of their performance compared to a Tennadyne T-12? I am under the impression that the T-12 would potentially work on 3.8 mhz
Author: "William H. O'Hara III" <ohara@aaahawk.com>
Date: Sat, 22 May 2004 14:53:30 -0400
Anybody that is putting up a tower, let me know. I would like to see how it done. Thanks -- AB1DT ** Tax return preparation for individuals and business, www.billohara.com ** www.yahoogroups.com/grou
Author: "William H. O'Hara III" <ohara@aaahawk.com>
Date: Tue, 25 May 2004 19:40:50 -0400
Does anyone have safety gear that they can loan me? I just got word on some Rohn 25G. I have to take it down this Saturday. I'm looking for any experienced help too. Thanks Bill Abington, MA 781.857.
Author: "William H. O'Hara III" <ohara@aaahawk.com>
Date: Tue, 6 Jul 2004 20:31:10 -0400
Is anyone familiar with a tapered tower design with zig zig cross brazing? Each section is 10' long. The width of the each face on the bottom section 26"(triangular footprint). It appears to have nes
Author: "William H. O'Hara III" <ohara@aaahawk.com>
Date: Tue, 14 Sep 2004 17:58:46 -0400
Billing by the hour should not necessarily be the revenue generator. I believe that it should serve as a cost center. The engineer should strive to provide a cost-effective job. Lawyers used to have
Author: "William H. O'Hara III" <ohara@aaahawk.com>
Date: Sat, 25 Sep 2004 08:57:55 -0400
Well, I should point out some of the bizarre things in this country. Especially since the fellow has claimed that the ham in Wheaton has lived in the past and the laws should be updated. A woman in T