Find out what relays are used in the WX0B (www.arraysolutions.com) stackmaster boxes that are used to switch various combinations of stacked HF beams. I don't think those relays are particularly exot
Are the hardline connectors of Andrew and Commscope interchangable? For instance, will a 7/8" Commscope connector fit 7/8" Andrew LDF-5, etc. ? Thanks / 73 Tom K4RV __________________________________
Thank you, Steve. That is exactly what I wanted to learn. 73 Tom K4RV Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA. ________________
Who makes thre most rugged 6 meter beam these days? I am ready to purchase a 6 meter beam and install it at the top of my tower. I'm looking for the beam that is most likely to weather ice and wind,
Dear Dino, Thank you. I already have several M2 yagis, but none for VHF. I was concerned about the "flimsiness" of those models with the 1/4" rod for 6 meter elements. 73 Tom K4RV -- Original Message
I have been hit here in central SC no less than 4 times in the past 2 years. I have a good ground and surge surpressors, but I have found that nothing, NOTHING else works better than disconnecting th
Anybody got the cable end preparation dimensions of Commscope CR1873 when fitting an 1873BDF connector? I have not been able to find such on the Commscope website. Thanks Tom K4RV ___________________
I have to whole heartedly agree with Daron N7HQR. Two part epoxy oil based exterior (Marine, Polyurethane, etc.) paints are at the top of list for long term protection and sealing from rusting. That'
In previous discussions concerning prevention of lightning damage, many useful ideas were brought forth and several comments were made about direct lightning hits with no damage done. How does one de
Who sells those N connectors that attach to Rg/8, Rg/213, etc. like a PL-259? Thanks Tom K4RV _______________________________________________ _______________________________________________ TowerTalk
Does anybody know if Bill at SkyCraft Communications plans to make antennas again? He had some great lightweight configurations and was very willing to make custom designs. His prices were good, too.
Is Andrew 1/2 inch superflex continuously flexible enough to be suitable for use as a rotor loop? Thanks, Tom K4RV _______________________________________________ ____________________________________
Has anyone ever been able to perceive the skew of gamma match feed just by listening to a signal. Has anyone ever lost a DX station or otherwise had difficulty aiming his beam because of gamma match