Author: "Michael M. Raskin" <rask1553@bellsouth.net>
Date: Mon, 7 Sep 2009 12:13:58 -0400
WaveNode WN-2 Digital Wattmetter with RT-1 Controller for Yaesu Rotator. Complete with AC adaptor power supply and all supplied cables and manual - $300 WaveNode HF-1 coupler (1.8-60mHz) - $45 WaveNo
Author: "Michael M. Raskin" <rask1553@bellsouth.net>
Date: Fri, 11 Sep 2009 21:05:23 -0400
WaveNode WN-2 Digital Wattmetter with RT-1 Controller for Yaesu Rotator. Complete with AC adaptor power supply and all supplied cables and manual - $275 WaveNode HF-1 coupler (1.8-60mHz) - $45 WaveNo
Author: "Michael M. Raskin" <rask1553@bellsouth.net>
Date: Sun, 13 Sep 2009 18:44:24 -0400
Antenna Analyzers Palstar ZM-20 Digital Antenna Analyzer. Includes the ZM30-BT Balanced Transformer Adaptor. Check out all of the advanced features at www.palstar.com. Sells new for $399. In excellen
Author: "Michael M. Raskin" <rask1553@bellsouth.net>
Date: Sun, 13 Sep 2009 21:20:45 -0400
Prior post was in ERROR - it should have read ZM-30. There is no such thing as a "ZM-20" Both the MFJ-206 and MFJ-854 are gone. Palstar ZM-30 Digital Antenna Analyzer. Includes the ZM30-BT Balanced T
Author: "Michael M. Raskin" <rask1553@bellsouth.net>
Date: Mon, 14 Sep 2009 23:35:40 -0400
More Antenna Analyzers (shipping extra) Palomar PCM-1 RF Current Meter. This measures RF current from 0.2-30MHz. Its clamp-on ferrite transformer fits over wires and cables up to 12mm (1/2 inch) diam
Author: "Michael M. Raskin" <rask1553@bellsouth.net>
Date: Mon, 19 Oct 2009 17:14:45 -0400
Guys - I need some advice on stacking on a 15' mast. I will have approximately 13" of usable mast and want to have a 3-element SteppIR with the 40/30 adder (16' boom) at the bottom of the mast, but I
Author: "Michael M. Raskin" <rask1553@bellsouth.net>
Date: Thu, 31 Dec 2009 20:44:52 -0500
Dale - I have never seen a post on this reflector complaining about the "six pack" - that being said, I can tell you that I have had intermittent relay closure problems. This has been a rare occurren
Author: "Michael M. Raskin" <rask1553@bellsouth.net>
Date: Fri, 1 Jan 2010 10:11:00 -0500
Jorge - HNY! I use it with the 7800 using the CI-V line. Also on the CI-V live are the Stepp-IR and PW-1. I have a Bandmaster Decoder Matrix board from McKay Radio Products (www.mckayproducts.com) th