- 1. [TowerTalk] Guy Wire Angle (score: 1)
- Author: "Paul Sturpe" <sturpe@gmail.com>
- Date: Thu, 5 Jun 2008 15:20:40 -0400
- What is the optimum angle for guy wires, i.e. if I have one set of guy wires at the 40 foot level of a tower, how far from the base should the ground anchors be? Paul, W3GQ __________________________
- /archives//html/Towertalk/2008-06/msg00106.html (6,487 bytes)
- 2. [TowerTalk] SO-239 Problem (score: 1)
- Author: "Paul Sturpe" <sturpe@gmail.com>
- Date: Wed, 29 Oct 2008 23:04:10 -0400
- BACKGROUND: I have had several instances where a PL-259 loses contact with an SO-239. I am told the problem occurs when a PL-259 is improperly prepared, leaving extra solder on the pin, thus making i
- /archives//html/Towertalk/2008-10/msg00625.html (7,559 bytes)
- 3. [TowerTalk] A3S Trap Covers (score: 1)
- Author: "Paul Sturpe" <sturpe@gmail.com>
- Date: Thu, 19 Feb 2009 18:06:10 -0500
- The trap end covers on my A3S need replaced. Does anyone have a helpful suggestion of what to use? I don't see them listed as a separate item in the manual. Paul, W3GQ _______________________________
- /archives//html/Towertalk/2009-02/msg00510.html (7,238 bytes)
- 4. [TowerTalk] FW: Tune 160/80 Vertical (score: 1)
- Author: "Paul Sturpe" <sturpe@gmail.com>
- Date: Sat, 20 Nov 2010 13:59:52 -0500
- I'm helping a friend who has an 80 meter 1/4 wave vertical. At the top, he has a 160 meter trap then a wire extending horizontally for 160 meters. It is therefore an inverted L on 160. The SWR on 80
- /archives//html/Towertalk/2010-11/msg00309.html (7,968 bytes)
- 5. Re: [TowerTalk] 80/160 ANTENNA IS SHORT (score: 1)
- Author: "Paul Sturpe" <sturpe@gmail.com>
- Date: Tue, 14 Dec 2010 18:49:23 -0500
- I have an 80 meter vertical/160 meter inverted L. It is very similar to the antenna described in ON4UN?s Low-Band DXing book, (third edition.) The primary differences are in the lengths I needed to u
- /archives//html/Towertalk/2010-12/msg00239.html (12,315 bytes)
- 6. [TowerTalk] Wireman 830 Balun Kit (score: 1)
- Author: "Paul Sturpe" <sturpe@gmail.com>
- Date: Sat, 27 Apr 2013 11:41:44 -0400
- There was a thread back in 2008 extolling the deficiencies of the Wireman's 830 balun kit. Notwithstanding the issues brought up there, does anyone have a copy of the instructions that come with the
- /archives//html/Towertalk/2013-04/msg00334.html (6,599 bytes)
- 7. [TowerTalk] TH5DX (score: 1)
- Author: "Paul Sturpe" <sturpe@gmail.com>
- Date: Wed, 28 Aug 2013 19:05:59 -0400
- I am restoring a TH5DX. I was able to obtain a manual with all the appropriate information except for one area. Page 11 of the manual details the Beta Match as Figure 12. Unfortunately the dimensions
- /archives//html/Towertalk/2013-08/msg00607.html (7,138 bytes)
- 8. [TowerTalk] Yaesu G5400B (score: 1)
- Author: "Paul Sturpe" <sturpe@gmail.com>
- Date: Wed, 22 Dec 2021 16:14:54 -0500
- I'm looking for a replacement for the capacitor used in the Yaesu G5400B elevation rotor. Here is all the info on the capacitor: MARCON ELECTROLYTIC AC60L100A 60 WVAC 5F22A Any suggestions would be a
- /archives//html/Towertalk/2021-12/msg00101.html (6,944 bytes)
This search system is powered by
Namazu