Hi Bob, I use the following for all of the trailer connectors that I use. I hope they are what you need. 73, de KN4KL ed Does anyone have any recommendations for trailer hitch electrical connectors t
Sorry I forgot to include the following http://www.delcity.net/store/Molded-Connector-Loops/p_8592 73, de KN4KL ed Does anyone have any recommendations for trailer hitch electrical connectors that wo
Hi Hans, At the age of 69, I still am climbing my tower, but I can see that day when I will no longer climb. The mind tells me that I'm still 16 but the body has a total different story to tell. I st
Hi All, Lets look at the Hygain rotating system. The device that is attached inside the tower turns itself 360 degrees, but it also turns whatever is attached the same amount. Thus it is correct to s
I was interested if anyone has ever tried to add director/reflector to the C3/C4 antenna making it a three element beam on 10,15 & 20? If so how did the outcome work and could you supply the element
Hi all The hot dipping might fill the holes, but if you use a bit two sized under the original hole and then use a taper pin the galvanizing should still be intact. 73, de KN4KL ed --Original Message
Hi Mike & Patrick, You might want to check out the following for mast steps also. http://www.kf7p.com/KF7P/Mast_Steps.html 73, de KN4KL ed Mike, I don't know about masts with steps but mast steps are
Hi David, I would just use two jam/panel nuts as that would meet your requirement. It would be twice as thick and would provide a lock for the first nut. 73, de KN4KL ed I am looking for a mounting n
Hi All, I removed a 4 element triband Yagi from a SK home and am trying to get the type of antenna and a manual if one is available. I think that it is a TET antenna but that is only a guess. I have
Thanks to all for the quick response to my question. The antenna appears to be a Mosley TA-53-M after I downloaded the manual from BAMA. It is a 5 bands with 3 elements on each band. 73, de KN4KL ed
Hi All, I removed a multiband trap vertical and am trying to get the type of antenna and a manual if one is available. I think that it is a some type of Cushcraft antenna but that is only a guess. Th
To all that replied to my antenna request. The antenna was the Cushcraft R-3 and I did find a manual online. As always, the group has the answers to 99.9% of the question asked. Thanks, 73, de KN4KL
Hi All, I would suggest looking at the Motorola R-56 manual (Standards and Guidelines for Communication Sites). This will provide most any thing you need to know. 73, de KN4KL ed --Original Message--
The manual I have on the LJ205BA states the boom support should be approx 3' above the boom and 16'4" from the boom support clamp. I hope this will help. 73, de KN4KL ed I concur with Grant, I connec
Hi Mike, If you can get a vehicle or battery within a short distance you could use an 12VDC to 120 AC inverter and then use your larger Weller soldering GUN. 73, de KN4KL ed Hi All, Long time since I