Try this link http://home.att.net/~surplusben/prod01.htm I AM IN THE MILITARY AND CURRENTLY ARE LOOKING FOR PUBLICATIONS OF THE AB-577 SO THAT WE CAN INVENTORY THE COMPONANTS AND GET THEM TO CIVIALIA
Come to Colorado. I have a whole th7 you can have. I enquired on the antenna reflector but no response so far. Anyone one in tower land have any leftovers from a junked or trashed Hy Gain TH7? I need
It has been removed now :( TT: I think this guy sold a Wouf-Hong earlier today http://cgi.ebay.com/Crossed-field-Ham-radio-HF-antenna-Crossfield_W0QQitemZ5 824611055QQcategoryZ4672QQrdZ1QQcmdZViewIte
You can still put in some sleeves through the rim joists. This will keep the sleeve further above grade. If you plan on having wrap porches make sure you get the sleeves or your access into the house
After using a full harness I will never use anything else! Much much safer especially with a fall arrest addon. Mike W0MU --Original Message-- From: towertalk-bounces@contesting.com [mailto:towertalk
Mike, I would look at the SteppIR 3ele or 4ele. They are fantastic antennas! If you like 12 and 17 you will love the SteppIRs. Nice to have a real tuned beam on those bands. You can buy the 3ele and
Maybe SteppIR owners know how well they work! Yes they are expensive but so are Alpha Amps, 7800's, 9000's and they all work too. The SteppIR is optimized for the freq in which you are operating on.
Amen. All you SteppIRr owners just back off and let the others go. I am tired of telling all who will listen how great the antenna works. I have decided that I don't need any more good competition in
Curious what you think is a better contest single antenna and why? We are talking single Medium sized antennas. --Original Message-- From: towertalk-bounces@contesting.com [mailto:towertalk-bounces@c
So we have 2 beams that are on 18 and 20 ft. booms. The C3/C4 has two count em two active elements on each band 20-10m. The SteppIR has 3 active elements. Yes, the C4 has the 40m dipole. Yes you get
I was not saying you or anyone else was critical of SteppIR. In fact, I agree with you. Mike W0MU Hi Mike, Let me be perfectly clear on this. I AM NOT CRITICAL OF THE STEPPIR! Forget whatever other e
The best advice is to do what the tower manufacturer recommends for that size antenna and your particular mounting situation. With out details such as your roof details it would be hard for anyone to
Is the Cushcraft XM240 still the best bang for the buck. Setup will be a AN tower 70ft self supporting. 40m beam on the top at about 85ft. SteppIR 4ele under it. I have an older 40-2CD that could be
I built one using a Crossman wrist rocket and fishing reel for a lot less than the $99 they want for it. I found that a reel that has an offset worked better. Just clamp the reel to the wrist rocket
We don't have trees that high. With the right weight 120ft is within reach. It fired over a 60ft tree with out any problem. clamps. line. What is the highest elevation you can get the line up and ove
The bearings that AN Wireless and Array Solutions do call for some grease and there is a zerk (sp) fitting for a grease gun. Rohn bearings should be dry. Mike W0MU Bill. Normal cleanup and bearing lu
Has anyone used these controllers? If so I would appreciate some feedback. I was looking for a better rotor controller for a couple of Alpha Spid rotators I ran across the RT-20 in the April Qst wher
9 elements on a 2 inch boom. I wonder what the claimed gain is. Has K7LXC and N0AX tested this engineering marvel yet? Ok, I'll bite. How wide is the boom? :-) _______________________________________
I don't know if this is possible in your situation but you might secure the mast with clamps or retighten the bearing and loosen the rotor plate. I always will put a couple of muffler clamps just abo
I think you can find the info on the Rohn site as well. Not sure what the link is. Mike W0MU It's something like 2-1/2 (or 3) by 2-1/2 (or 3) by 4' deep. That's my recollection. But you really should