Before I reinvent another wheel :-) , can anyone send me a picture or two of how you did your outside to inside antenna panel? My ideais to put an external service box on the outside of the workshop
I don't know why anyone would have this but since all else is failingI want to ask: does anyone have the base section of a Hy-Gain hy-towerthat has not been installed? I need the three insulators, th
Hi Dave, MFJ. At present their HyGain operation is a fiasco set on the shelf while theone or two people involved bring in yet another brand: Mosley. I've tried forweeks to get the parts for the Hy-To
Will do John and again, sorry for the mistake. _________________________________________________________________ Hotmail: Trusted email with Microsoft's powerful SPAM protection. http://clk.atdmt.com
Here's another dumb question: Does anyone know if a functional radial system can be made using fencing wire mesh, say 4 x 4? If unwelded mesh were used and laid down the length of either 1/8 wave or
The Rohn hinged baseplate for Rohn 25G is item number BPH-25G. It is held onto the base by four 1/2" x 12" J-bolts but none of the drawings spell out the bolt pattern layout dimension. Since the base
Its looks like I am going to be able to acquire a very used but good condition TH6 antenna. Looking for information I only find TH7 at MFG/HYGAIN. Looks like the TH7 has one more element. Does anyone
Tony, 3M makes a two part resin casting kit for splicing cables together. Whiletailored for round cable, it works well with anything. I've remade rubbermallet heads, made custom feet for heavy amplif
There's a great article on RF Antennas at: http://cowboys.homeip.net/Files/ Long, about 36 mb so slow download but it is specifically: http://cowboys.homeip.net/Files/RadioAntennaEngineering-printer.
We recently had our utilities run underground to resolve some problems. Left is a coil of 5/16" diameter stranded aluminum power line, about 100' or more. Twoof the wires are black insulated, one is
I have the following components to an old TMC wire antenna system and would like to sell them, preferably as a package. But I will entertain separate needs and make up a list if there is enough deman
Is anyone very familiar with most antenna rotator units that have been around? I have one which is unidentified and I see no markings on it. I can email a pictureif someone is interested and would li
It looks like the unit I have is a Ham-M Series 4 made in 1966. Under the bottom pole mount section was stamped " 4 6 0 6" which is said to mean Series 4,made in 6th week of 1966". And all this only
Does anyone on the list live in or near Muskegon, Michigan ? If so and you could spare a few minutes, please QSL. Thanks, John W5JV _______________________________________________ ___________________
Anyone traveling through Arizona along I-10 in the next six months? Perhaps toDayton ham fest? I need some help with some Korean era gear that is really too fragile to ship.John _____________________
I've got approximately 150 feet of 6 conductor used control cable for sale.It is suitable for use on towers, marine craft or direct burial applications. Now why would anyone be interested in used con