Can someone tell me how to identify the various CDE rotors? I acquired a rotor today from an ex CBer who said he thought it was a Ham-M. The control box says CDR and if memory serves me a CDR was a t
I remember Gotham quite well. I also learned the hard way that cheap was not necessarily good! I bought a 4 element 15 meter yagi from them from an ad in QST. When I put it up I could work just as ma
I had an unfortunate mishap yesterday and my 40' Radio Shack push up mast bucked and broke in the middle just above the gable of the house so I am looking for a replacement 40' or 50' push up mast. H
About a month ago I posted to this list looking for a replacement Radio Shack/Rohn push up mast for my inverted vee. I managed to recently acquire a AB903 crank up mast but the cable for the Third se
I need help in identifying the model number/nomenclature for an antenna that I bought in 1967. The antenna was made by HyGain in the late 50's or early 60's. I thought I remembered it being called th
Found it, thanks to a friend. It was found in a 1960 Allied Catalog and was called the Hygain model TDK Trap-Traveller Micro Dipole. I have the scan of the page but the page number got chopped off. I
I am hoping that someones can help me. I recently committed to buy a crank up mast that is being sold by the daughter of a silent key. The mast looks like about 60ft with 3 sections 20ft or so tall.
I again need help in identifying a crank up mast. The base section is about 6" od and appears to be steel. Each section including the base is about 5ft long. There are 4 sections total. Each section
I have been asked to help the daughter of a silent key (W7ZZV) liquidate her father's gear. I have some pictures of the tower at: https://www.dropbox.com/sh/w2o5eeo7l6uwos3/AAAfQZRvgBewZKgRWMVbVi96a?
Hello Jim. Your advice is very good. In fact, it is the advice I gave myself and the daughter when I was asked to help with the liquidation. I even put her in contact with the club president. He drov
I wonder if anyone would have information on the Hygain T3 loading coil used in the HyGain T3TDK Trap Traveler triband dipole as listed on page 403 of the 1961 Allied catalog: http://www.alliedcatalo
If anyone is interested here are some pictures of the trap opened up and the element that screws into it: https://drive.google.com/folderview?id=0B6Gh9CZ5mOHBYzJnNGd0UkZoTDQ&usp=sharing I did not mea