Hi Bob, You should be able to go to MFJ's website and down load it from there. 73 Larry WA9VRH _______________________________________________ _______________________________________________ TowerTal
Hi Steve, I was faced with a similar issue roughly 22 or so years ago. We found 5 acres in the country but it had a double set of transmission lines crossing the SE corner of the property. I drove ou
Hi Scott, Rohn is still in business but they are owned by Radian I believe it is. If you do a search on Rohn towers it should take you to the website. 73 Larry WA9VRH ________________________________
Hi Scott, Many people think that Rohn has disappeared from the face of the earth. Thank goodness that hasn't happened. Good luck on finding the information you are looking for. If you can't please le
Hi Derek, I have a scanned Heights tower catalog/ info sheet that has a bunch of information on it. I have to locate it but I will email it to you later today. I need to find which pc it is on. 73 La
Hi all, Don't forget your local well driller. Mine had a trailer that my HDX555 would fit on so I had the trucking company hold it at the dock about 20 miles from here. It saved me about $250.00 on s
Hi Roger, We built a new house out in the country about 15 years ago. I did some dumb things like deciding to wire the whole place by myself. It was the project from haties as it seemed like it would
HI Robert, I have an Alpha-Delta DX-a twin sloper that works great on 160, 80, and 40m. I have a 55' tower and the sloper is attached to the top. I have a ground wire runnng form the mast pipe to thr
Hi Joe, The CD-44 does not have a brake where the HAM4 does (as far as I know) I would go to the Hy-Gain website and download both manuals. 10 bucks for the Mosley manual doesn't seem to be out of li
Hi Leif, Hey sit back and take a deep breath! Are you wanting to put up a 200 foot tower or a 50 foot tower?? That will make a big difference! Let us know! Larry WA9VRH -- Original Message -- From: "
Hi Scott, I have used a DX-A for about 7 years or so. My DX-A is fastened at the 55' level on my 55' crankup. I have a TA-33 at about 55' and the two work real well together. I have not used 40m that
Hi Bill and all, Bill I have a Mosley TA-33 at about 55'. I have a 6 element Cushcraft 6m beam about 5-6 feet above it. I have not noticed any loading issues between the two. Both are oriented the sa
Hi Jamie, I have had good luck with S.O.S. steel wool soap pads. I know people get freaked out about the steel part but I never found that to be an issue. Cleaned up a couple of TA-33's and also a 40
Hi Tom, Yes the SOS pads with the soap. I have found they work better than the plain steel wool as they residue washes off easier. I would recomend giving them a try. Worked good on a couple of TA-33
50TH Anniversary! PEORIA SUPERFEST* September 20-21, 2008 Exposition Gardens 1601 W Northmoor Road, Peoria, Illinois TICKETS Double Stub Advance Tickets Still $6.00 Under 12 Free! GOOD ALL WEEKEND! S
Hi Mike, Bob, and all, Some really good news for people with Rohn towers and wanting Rohn towers. Radian has done something don't know exactly what but Rohn is now it's own company located in Peoria
50TH Anniversary! PEORIA SUPERFEST* September 20-21, 2008 Exposition Gardens 1601 W Northmoor Road, Peoria, Illinois TICKETS Under 12 Free! GOOD ALL WEEKEND! Single Stub Ticket at Gate $8.00 EMERGENC
Hi Michael, Rohn is now their own company again. Radian bought them a few years ago but they divested Rohn a few months ago. Here is Rohn's website http://www.rohnproducts.com/frontpage.htm If you do
Hi Gary, The Ham IV are pretty simple. If it was me I would disassemble the rotor and clean out the old grease from the bearing races and the bearings. Clean off the rust wherever it may be and give
Hi Bill, My suggestion is two fold. First have him put a TA-33 or simlilar on the tower. Then take the XYL over to see someone who has a dipole or inverted V up that is made with small and or colored