Hi Larry, It could be an AR-22R or an AR-22XL. Do you have the control box for it? I will in a following email send you a pdf of the AR-22R. If that is not the one I can scan the AR-22XL manual. Hope
Hi Phil, Well I think that Bob was a real dumb As (bunny) for letting his rotor or rotator fill up with water. I doubt that condensation would have been enough to fill up the upper bell. He lives in
US Tower recommended four weeks for the base for my 55' crank-up. The tower arrived a week early at the shippers terminal. (I live in the sticks and a 40' semi trailer would be an issue getting in an
Hi Bob, Please go to: http://www.radiancorp.com/ and you will see the link to Rohn towers. Radian bought Rohn a few years ago but they are still manufactured in the Peoria Il area. No connection on m
Next we will have to take the glass out of our windows so they don't slam into them. We probably better bury all powerlines just incase a bird is carrying a ground wire. Oh yes bird baths have to hav
Hi Bill, I can't help on the cradle question but you might try looking up a well driller. Mine was able to load my US Towers HDX55 which was 22 feet long but only 900 lbs or so. However I would bet h
Hi Mike, go to: http://www.hy-gain.com/manuals.php and you can down load the manual for teh Ham IV 73 Larry WA9VRH the _______________________________________________ ________________________________
Hi Derek, I have the same TA-33 Jr that I bought in probably 1971 or so. I upgraded it to an MP-33 (meaning that it has the high power radiator coils) about three years later. Today it is still in th
Hi Bert, I have one and I need to see if I have it scanned. If so I will get it out to you tonight. If not I will scan tomorrow and get it on it's way. 73 Larry WA9VRH -- -- _________________________
Hi Scott, Are you planning on going out there anyway? If not you might check to see what a trucking company would charge to deliver it. Yes it would be an issue getting it to the trucking company how
Hi Ken, I do have some information on Rohn crank ups. Rohn will not admidt (at least the last time I asked) I will have to dig the information out but be happy to scan and send to you. I have QST's t
Doc, Have you looked on MFJ's website? I think they have most of their manuals available for downloading. Larry WA9VRH _______________________________________________ ________________________________