Can I solder parallel conductor transmission line at the spot where antenna wire is soldered to a baluns connections and then simply disconnect the coax from the balun and use the parallel conductor
This video will help you. https://youtu.be/-TOyeaOfawg <https://youtu.be/-TOyeaOfawg> An Evening with Martin F. Jue MFJ's Antenna Analyzers Using the MFJ-269 to Test Coaxial Cables, Part 1 of 2 at Ga
Here is what I use. The WI6X Tennis Ball Release System for Placement of Antenna Halyard Lines DJI Phantom 4 drone Tennis ball 5-feet 14 AWG wire Electrical tape Ceramic egg insulator 6x6 bright colo
This thread on the hexbeam groups.io group discusses the 40 meter dipole element in the hexbeam. https://groups.io/g/hexbeam/topic/41443856 G3TXQ has some 40 meter element data on his hexbeam site.
I drilled through a tennis ball, pushed 12 AWG solid wire through it, and wound the wire ends around the skids of a DJI Phantom 4. I cut a slit in the tennis ball that will fit one end of a porcelai