What is the minimum accepted vertical separation between a C4 and a uhf/vhf combo? I think I'll have the uhf/vhf ( both 20 elements) on a T type arrangement on the top of the mast and may only be abl
Cushcraft is a good choice. Works well on 40 and as a bonus will tune and work very easy on 17m. F12 is good also but the linear loading is a big pain in the a$$. 73 Jamie WW3S version well.It Weathe
I'm not sure the problem is the reply to; I seem to be getting the same message, usually a few days after the first one was posted. Anyone else seeing this? get sense without hear a
Bob is absolutely correct about altitude. In the mountains of Chile the UV exposure is so great that most animals, especially rabbits, go blind soon after birth. I believe the lack of ozone helps con
The C3E is a dog on 12m, so-so on 17m. The C4 however has gain on 17m, just 180 degrees from where its pointed....my C4 rocks on 17 !!!! 73 any Weather Stations", and lot's more. Call Toll Free, 1-80
Ham-Law is still active: The Ham-Law Mailing List. This list is for discussion and does not purport to give legal advice. Submissions: ham-law@altlaw.com Subscribe and unsubscribe: ham-law-request@al
Pardon the interruption but wondering if anyone has a copy of the manual for a Gladiator Phoenix Special (160/80 vertical) Particularly need the dimensions for the loading wires. Willing to pay dupli
When cutting/stripping 9914F/Bury Flex, on that small part between the center conductor and the braid, do you leave the foil/mylar over the dielectric or do you strip it off also? Whats the trick to
Thanks Steve...thats actually so simple. I don't know why I never heard of it before...I've always stripped only the jacket first and then have that mess when the braid unravels while trying to cut t
Gladiator Phoenix Special 180/80m vertical for sale. Very good condition, garage kept last few years, complete, with manual. Can ship UPS. 275.00 or best offer, plus UPS. ____________________________
Force 12 C3E (extra 10m director) for sale. Disassembled, marked for easy assembly, complete, including manual. In very good condition (a few of the u bolts rusty). Includes mast plate and f12 balun.
DISCLAIMER: I OWN A STEPPIR....proceed at your own risk. I installed a 3 element Steppir this August. It replaced a C3E. I was very hesitant to buy a Steppir for two main reasons, price being one, an
1-800-333-9041 with any questions and ask for Sherman, W2FLA. _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations",
your _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/tower
My HD-73 will only rotate about 90 degrees, between about 125 and 35. When it gets to either of those two headings it just stops, doesn't sound like its moving or anything. I tried a new controller a
Anyone know which handbook, if any, had plans for a 4 port homebrew coax switch? It was controlled via the coax. Any construction articles in QST about one? 73, Jamie WW3S ___________________________