Yes, and lest I forget, I want to thank the previous admin person, Glen ( I think), for a job well done. He helped me a couple of times get list mail problems fixed. Jay, WX0B -- Jay Terleski WX0B -
My Array Solutions Swinging Gate Side Mount can go on a larger tower and is the strongest side mount out there. It may fit on this mans tower if he is interested by adding an extension to the legs. W
For a complete system that can work 3 bands with the tuner, and is very attractive, have a look at the Titanex 80HD Free standing tower. It includes the insulated base and Winch to put it up or down.
Gentlemen, I recieved this information from Titanex's Dr. Szobolcs about the vertical base. "Dear Jay, the concrete for V 160HD and V 80HD is depending from the ground condition. But 50cm x 50 cm and
Sylvan, You can make your own or you can buy a commercial balun. The problem is which one do you trust vs one you can build and know the specifications are as needed at the frequency of use. As a man
Funny stuff this RFI you guys are looking at. And since I have a TIC ring, I better try and help some in case I have the same issue arise. So far I have not had time to use mine since its controller
The offsets can be compensated for easily with a little longer coaxial calbe that acts as a delay line to electrically aliegn the driven elements, when pointed in the same direction. Its already been
Hold on there partner. The Antenna Forum example was a C3 not a C31XR. Two elements on 20m, 2 (I think) on 15 as well. The example was supposed to be generic although I used a C3 model. It shows what
Guys, I cannot resist. Have a look at this. http://www.arraysolutions.com/Users/users.htm Look at PY5EG and his teams Giant 10m array. I just got the pictures from him and it is awesome. I hope he gi
Make sure its not those TCI cable modems. Millions of them were installed with frequencies inside the 80m band. TCI was supposed to replace them with frequencies below 3.5 Mhz. Jay, WX0B Array Soluti
Hi Mike, I make some very high quality units. And they have survived at big stations. See them at www.arraysolutions.com in the products section. Jay, WX0B Hello all, I know somebody asked this not t
HI all TT fellows and Bud. I just saw this message and would like to assure Bud that even an Ham from KY can make the Sixpak 2 radio 6 antenna switch work. But I will always accept a ride down VP5 wi
Grant has done a great job of creating a software interface for the HF-CIA. I would encourage anyone to check it out. I was his beta site and I learned a lot about what can be done with the instrumen
My Friend is looking for a roomate for his stay at the Hamvention. My Friend rented a room and now is looking for a Roomate. Its Downtown near the Stouffers. Downtown Doubletree Hotel 11th S. Ludlow
I will probably regret this but let me jump in while the water is still fine. I looked over Steve's article while on the Stairmaster for an hour a few days ago. And basically without checking all the
Tom, Yes I agree that my example is very extreme and one that an amateur operator would not intentionally create as a permanent antenna system. I have some meetings with a couple old RF matching guru
Tom, I will keep this short. You may wish to consider a turnkey solution for this from my little company. Most of the contesters are aware of the 6 antenna 2 radio matrix I manufacture. You can find
I'd rather contribute to a thread ABOUT reciever preamps. I think I just learned from W3LPL he uses beverages on 10m-20m and they have preamps. Whats the story with this. What are the preamp circuits
Guys, I don't know the legitamacy of this info. But a friend surfing the net came up with the following today. Someone may want to check out this deal. It seems pretty good. Jay, WX0B Commercial 90-f
All, I think Eric should be congatulated. Good job OM! This goes in the hints and kinks file on my PC. I learned alot from this thread. I appreciate all who contributed. Very 73 Jay To: <towertalk@co