- 1. [TowerTalk] Adding insulators to bottom guys (score: 1)
- Author: Randy Lake <randyn1kwf@gmail.com>
- Date: Mon, 4 May 2015 06:35:19 -0400
- Good morning. I have a 100' R25 guyed with 1/4" EHS. The bottom set of guys are not insulated. I would like to add insulators and would like some guidance. Can I drop the bottom set without temp guys
- /archives//html/Towertalk/2015-05/msg00016.html (6,829 bytes)
- 2. [TowerTalk] Adding insulators to bottom guys (score: 1)
- Author: "Jim Thomson" <jim.thom@telus.net>
- Date: Mon, 4 May 2015 06:10:32 -0700
- Good morning. I have a 100' R25 guyed with 1/4" EHS. The bottom set of guys are not insulated. I would like to add insulators and would like some guidance. Can I drop the bottom set without temp guys
- /archives//html/Towertalk/2015-05/msg00020.html (7,914 bytes)
- 3. [TowerTalk] Adding insulators to bottom guys (score: 1)
- Author: "Abrams, Saul (DHSES)" <Saul.Abrams@dhses.ny.gov>
- Date: Mon, 4 May 2015 14:26:05 +0000
- Loosen all three bottom guys so that there is no real tension on them. This will allow you to drop one bottom guy at a time without pulling the tower out of plumb. Then replace one guy at a time, rem
- /archives//html/Towertalk/2015-05/msg00022.html (8,490 bytes)
- 4. Re: [TowerTalk] Adding insulators to bottom guys (score: 1)
- Author: K7LXC--- via TowerTalk <towertalk@contesting.com>
- Date: Mon, 4 May 2015 12:20:19 -0400
- insulated. I would like to add insulators and would like some guidance. Can I drop the bottom set without temp guys? Howdy -- I recommend Philly or Polyrod for populated towers but the advantages of
- /archives//html/Towertalk/2015-05/msg00023.html (7,880 bytes)
- 5. Re: [TowerTalk] Adding insulators to bottom guys (score: 1)
- Author: Randy Lake <randyn1kwf@gmail.com>
- Date: Mon, 4 May 2015 15:59:58 -0400
- This is being done to try and help a 160m Spitfire that I am tuning on the tower. By modeling it shows the bottom set of guys may be causing a problem. That is why I am going through the bother of do
- /archives//html/Towertalk/2015-05/msg00026.html (8,673 bytes)
- 6. Re: [TowerTalk] Adding insulators to bottom guys (score: 1)
- Author: <john@kk9a.com>
- Date: Mon, 4 May 2015 19:49:00 -0400
- On calm days I have dropped a set of guys many times on my Rohn 65g and Rohn 55g towers to raise an antenna or to change the guy position. Of course I would not advise that YOU do this with your Rohn
- /archives//html/Towertalk/2015-05/msg00029.html (8,214 bytes)
This search system is powered by
Namazu