- 1. [TowerTalk] Connectors needed (score: 1)
- Author: jcowens1@comcast.net
- Date: Wed, 25 Apr 2007 16:29:50 +0000
- I am looking for mating connectors for connection to the rear of my Kenwood TRS850 SAT that have the following type or part numbers. DIN13M DIN6M These are small round connectors with male pins and t
- /archives//html/Towertalk/2007-04/msg00524.html (7,024 bytes)
- 2. Re: [TowerTalk] Connectors needed (score: 1)
- Author: Jim Lux <jimlux@earthlink.net>
- Date: Wed, 25 Apr 2007 13:14:33 -0700
- They're called either DIN or Mini DIN connectors, depending on the size Mouser probably has them. I know they have up to 9 pins, but I haven't looked for 13 pin. Mouser definitely has this one. Jim,W
- /archives//html/Towertalk/2007-04/msg00533.html (7,665 bytes)
- 3. Re: [TowerTalk] Connectors needed (score: 1)
- Author: "Jim Brown" <jim@audiosystemsgroup.com>
- Date: Wed, 25 Apr 2007 15:06:08 -0700
- I've always hated these connectors, and the ones that Mouser sells have the added "feature" of melting quite easily while taking solder quite poorly. As a result, it's really tough to solder reliably
- /archives//html/Towertalk/2007-04/msg00537.html (7,772 bytes)
- 4. Re: [TowerTalk] Connectors needed (score: 1)
- Author: Jim Lux <jimlux@earthlink.net>
- Date: Wed, 25 Apr 2007 16:42:15 -0700
- All those DINs seem to have this problem. As I get older, the thrill of soldering tiny wires into tiny connectors is fading. I look for cables with the connectors already on them, and cut one end off
- /archives//html/Towertalk/2007-04/msg00540.html (8,921 bytes)
- 5. Re: [TowerTalk] Connectors needed (score: 1)
- Author: "Hsu, Aaron (NBC Universal)" <aaron.hsu@nbcuni.com>
- Date: Wed, 25 Apr 2007 18:20:00 -0700
- Might I offer a suggestion that's worked for me. Instead of soldering directly to the pins, I went out and purchased the female pin-sockets used in "DB" style connectors (such as serial or parallel p
- /archives//html/Towertalk/2007-04/msg00542.html (8,751 bytes)
This search system is powered by
Namazu